| Segment |
Description |
Time/Rev Date |
| 6000 - X2 Demo Download & Installation Instructions |
Download link for the Mastercam X2 Demo software and installation instructions |
05:04 min |
| View Segment |
|
10/25/2007 |
| 6100 - Introduction to Streamingteacher |
IMPORTANT! PLEASE WATCH THIS VIDEO: Getting around in the Table of Contents, Using Filters and Search capabilities. |
6:57 min |
| View Segment |
|
9/7/2006 |
| 6101 - Version Differences |
Difference in Appearance Between Versions |
2:00 min |
| View Segment |
|
9/7/2006 |
| 3106 - Help Menu |
Accessing Help. Navigating through the Help Menu. Accessing The Mastercam X Reference Guide. |
2:37 min |
| View Segment |
|
9/7/2006 |
| 6103 - About Mastercam Dialog |
The "About Mastercam" Dialog box and Mastercam on the Web: Zip2Go Utility, Reference guide |
2:19 min |
| View Segment |
|
9/7/2006 |
| 3109 - Windows Basics |
File naming, rename, delete, minimize, maximize, alt tabbing through open programs. |
4:55 min |
| View Segment |
|
9/7/2006 |
| 3111 - CAD/CAM Coordinate System |
Cartesian coordinates, Point Locations within the Cartesian Coordinate System. |
6:07 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3201 - Menus / Interface |
How to access the menus to perform functions. How to use shortcut keys to access functions. |
2:57 min |
| View Segment |
|
9/7/2006 |
| 3203 - Toolbars |
Toolbar configuration, new toolbars, right mouse button configuration. |
8:38 min |
| View Segment |
|
9/7/2006 |
| 3205 - Hotkeys |
Hotkeys for quick access: Quick reference card, System focus, Underlined letters, help topics, Tool tips and Learning Mode. |
6:45 min |
| View Segment |
|
9/7/2006 |
| 6108 - File Open, Save dialog boxes |
Access and Options for File Open and Save: File Descriptor, Filtering / Converting, Save As, File Type Options. |
5:03 min |
| View Segment |
|
9/7/2006 |
| 6708 - MR2: Save Some |
Save files in different formats |
01:11 min |
| View Segment |
|
8/8/2007 |
| 6107 - MRU |
Most Recently Used, MRU Dropdown option, MRU on/off. |
4:31 min |
| View Segment |
|
9/7/2006 |
| 3241 - Undo / Delete |
Undo / Redo. Unlimited or Limit. Delete / Undelete. Delete Duplicate Entities. Events not available for Undo. |
5:02 min |
| View Segment |
|
9/7/2006 |
| 6703a - MR2: Design Enhancements - Part 1 |
Deleting associative entity options |
00:38 min |
| View Segment |
|
8/8/2007 |
| 3207 - Mouse Actions |
Demonstrate Mouse Functionality as it Applies to Various Areas of Mastercam. |
7:55 min |
| View Segment |
|
9/7/2006 |
| 3211 - System Info, View Gnomons and Status Bar Feedback |
Cursor Tracking, Units and Scale indicators, System Origin indicators, G-View, C-Plane, T-Plane, WCS Indicators, Hotkeys for quick access. |
7:31 min |
| View Segment |
|
9/7/2006 |
| 3213 - View Control |
Zoom/Un-Zoom, Fit to Screen, Pan vs. Spin, Dynamic Rotate, Zoom to a Target, Repaint, F9, Alt+S and Right Mouse-Click Functionality. |
4:54 min |
| View Segment |
|
9/7/2006 |
| 3650d - Un-Zoom Previous |
The "F2" Hotkey is now Un-Zoom Previous. |
1:24 min |
| View Segment |
|
9/7/2006 |
| 3217 - Status Bar |
Items showing by default. How to access. Right and Left Click Functionality. Customization. |
3:42 min |
| View Segment |
|
9/7/2006 |
| 6219 - Operations Manager Panel Access |
Accessing the Operations Manager and toolpath, solids and art manager. Plus contents of the Toolpath Manager. |
5:14 min |
| View Segment |
|
9/7/2006 |
| 6707b - MR2: Operation Manager |
Now dockable, Resize and float, Second monitor, Font & background customization |
01:06 min |
| View Segment |
|
8/20/2007 |
| 6105 - Tooltips and Learning Mode Prompts. |
How to access tool tips and Learning mode prompts: On / Off, Tool button size, Dropdown arrows, Learning mode prompts, Activating Learning Mode. |
4:28 min |
View Segment
|
|
9/26/2006
|
| Segment |
Description |
Time/Rev Date |
| 3221 - General Selection Ribbon Bar |
Overview of the General Selection Ribbon Bar, Selection Methods, Entity Masks for "All" and "Only", Hot Key Tips. |
5:19 min |
| View Segment |
|
9/7/2006 |
| 3227a - Chaining Basics |
What is a Chain, Full chain, Partial Chain, How to access the Chain option, Chaining intersecting Geometry and Chain Direction. |
7:59 min |
| View Segment |
|
9/7/2006 |
| 3227b - Chain Selection Problems |
Recognizing Chaining Problems: Overlapping Entities, Duplicate Entities, Improperly Trimmed Entities and Impact on Toolpaths. |
8:43 min |
| View Segment |
|
9/7/2006 |
| 3223 - Pre-Selection |
Turning Pre-Selection On/Off, Selecting entities prior to function, Selecting entities after function, Unselecting entities. |
2:49 min |
| View Segment |
|
9/7/2006 |
| 3225 - Masking |
A more detailed look at the Masking option for entity selection. "All" and "Only". Setting Preferences. "Same As" Option. "Maintain Only" Option. Saving a Mask Configuation. |
6:12 min |
| View Segment |
|
9/7/2006 |
| 6226 - Quick Mask |
Using the Quick Mask Feature and All or Only Selection |
4:52 min |
| View Segment |
|
9/7/2006 |
| 6704 - MR2: Interrupt Mode |
Interupt a function to perform another |
01:03 min |
View Segment
|
|
8/8/2007
|
| Segment |
Description |
Time/Rev Date |
| 3229 - Levels Basics |
What are Levels, How to Change Levels for New Geometry, Accessing the Levels Manager, Naming Levels, Level Visibility On or Off, Main Level Always Visible Option. |
8:15 min |
| View Segment |
|
9/7/2006 |
| 3230 - More on Levels |
How to change Levels for Existing Geometry, Match the Level of Existing Geometry. |
2:45 min |
| View Segment |
|
9/7/2006 |
| 3231 - Levels Manager |
Using Level Sets, Saving and Importing Level Formats, Selecting Levels, Creating a Levels Report. |
3:47 min |
| View Segment |
|
9/7/2006 |
| 6706b - MR2: Levels Manager |
New features of Levels Manager: Modless, Second Monitor, Filter |
01:37 min |
| View Segment |
|
8/20/2007 |
| 3243 - Multi-Viewports |
How to access viewports, changing views inside a viewport and using viewports with backplot. |
3:05 min |
| View Segment |
|
9/7/2006 |
| 3303 - Colors, Line Style and Width |
Set Attributes For Geometry to be created, Change attributes of Existing Geometry, Match Color of Existing Geometry. |
4:47 min |
| View Segment |
|
9/7/2006 |
| 3305 - Attributes Manager |
Access the Entity Attributes Manager, Setting Preferences, Apply to Existing Geometry. |
7:05 min |
| View Segment |
|
9/7/2006 |
| 3307 - Groups / Result |
Creating Groups. Group Colors vs. Entity Color. Selecting entities by Groups. Automatically Generated Groups and Results. |
6:58 min |
| View Segment |
|
9/7/2006 |
| 3308 - Blank/Un-Blank, Hide/Un-Hide |
Using the Hide / Blank Utilities to Temporarily Remove Entities from the Graphics Area. |
4:31 min |
| View Segment |
|
9/7/2006 |
| 6227 - Basic Analyze Functions |
Access Analyze: Dynamic and Properties, Edit using Analyze. |
5:37 min |
| View Segment |
|
1/8/2007 |
| 6228 - Drafting Smart Dimensions |
Access Smart Dimensions, Drafting Options, Selecting Geometry for Adding Dimensions, Drafting Hotkeys, Cursor Characteristics. |
07:11 min |
| View Segment |
|
9/10/2007 |
| 6229 - Drafting Standard Dimensions |
Horizontal / Vertical Dimensions, Parallel Dimensions, Angle Dimensions, Ordinate Dimensions, Point Dimensions, Selecting Geometry for Adding Dimensions, Adding Tolerances to Dimensions, Accessing Smart Dimension Tool for Editing. |
07:33 min |
| View Segment |
|
9/10/2007 |
| 6231 - Solid Layout |
Basic Overview for creating a Multi-View Layout from a Solid: Accessing the Solid Layout Option. Setting Layout Parameters. Selecting Levels. Resetting Parameters. Alignment. Suppressing Hidden Lines. Adding Dimensions. |
04:58 min |
| View Segment |
|
9/11/2007 |
| 6705 - MR2: Invert Selection |
Invert selection button |
00:37 min |
View Segment
|
|
8/8/2007
|
| Segment |
Description |
Time/Rev Date |
| 6110 - Introduction to Geometry Creation - Example #1 |
Part 1: Live/ Fixed Entities, Create Line End Point, Obtain X and Y values, Hard and soft lock, Trim divide. |
4:40 min |
| View Segment |
|
9/7/2006 |
| 6111 - Introduction to Geometry Creation - Example #2 |
Part 2: Create Arcs center point, Create Arcs tangent, Trim, Delete entities, Xform rotate. |
4:49 min |
| View Segment |
|
9/25/2006 |
| 3309 - 2D / 3D Mode |
2D / 3D modes and using Z depth, Creating geometry in 2D space and Creating geometry in 3D space. |
8:06 min |
| View Segment |
|
9/7/2006 |
| 3311 - Ribbon Bar |
Activating the ribbon bar. Unlocked, Soft-lock and Hard-lock. Navigating through the ribbon bar, tool tips, learning mode, closing the ribbon bar. |
4:58 min |
| View Segment |
|
9/7/2006 |
| 3313 - Live, Fixed and Phantom Entities |
Properties of entities when they exist as a: Phantom Entity, Live Entity, Fixed Entity. |
1:49 min |
| View Segment |
|
9/7/2006 |
| 3318 - Relative Positioning |
Create Entities Relative to the position of another. Define location by X-Y coordinates, Polar Coordinates, and Distance along and entity. |
3:11 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3321 - Point Function |
Create Point Position, Point Dynamic, Node Points, Point Segments, Point Endpoint, and Point Small Arcs. |
6:53 min |
| View Segment |
|
9/7/2006 |
| 3315 - Line Function |
How to access create line endpoint, input x and y coordinates for endpoints, create line with polar information, multi-line creation, create vertical and horizontal lines, create tangent lines. |
6:51 min |
| View Segment |
|
9/7/2006 |
| 3316 - More on Lines |
Create line closest, line bisect, line perpendicular, line parallel, line parallel and tangent. |
3:53 min |
| View Segment |
|
9/7/2006 |
| 6316b - MR1 : Line Tangent To a Point |
Create a line defining the tangent point of an arc, Selecting an arc or spline, Choosing the tangent point, Define the line length. |
02:25 min |
| View Segment |
|
3/13/2007 |
| 3323 - Rectangle / Rectangular Shapes |
Sketching a rectangle, defining by 2 points, defining by width and height, rectangle including a surface, rectangular shapes, "D" shape, double "D", ob-round, choosing an anchor point, filleted corners, center point and rotate the orientation. |
5:05 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3317 - Arc Tool |
Basic Arc Tool Options. Create Circle Centerpoint. Ribbon Bar Fields / Hotkeys. Edit a Live Entity, Create Circle Centerpoint and Tangent. |
3:23 min |
| View Segment |
|
9/7/2006 |
| 3317b - Arc Polar |
Defining an Arc By Start and End Angles. Defining and Editing an Arc Center Point. Using the "Flip" option. Using The Tangent option. |
5:18 min |
| View Segment |
|
9/7/2006 |
| 3317c - Create Circle Edge Point |
Defining a Circle by 2 or 3 Points. Creating a Circle Tangent to 2 Entities, and to 3 Entities. |
3:21 min |
| View Segment |
|
9/7/2006 |
| 3317d - Create Arc Endpoint |
Create Arcs Defined by Endpoints. Tangency Option for Create Arc Endpoint. |
2:18 min |
| View Segment |
|
9/7/2006 |
| 3317e - Create Arc 3 Points |
Create Arcs as Defined By 3 Points. Create Arcs Tangent to 3 Entities. |
2:03 min |
| View Segment |
|
9/7/2006 |
| 6317e - Arc Tangent 2 entities and a Point |
Create arc 3 points. Tagent option. Order of entity selection. |
01:21 min |
| View Segment |
|
9/7/2007 |
| 3317f - Create Arc Polar Endpoints |
Create Arcs Defined By End Point Positions. |
2:58 min |
| View Segment |
|
9/7/2006 |
| 6317g - Create Arc Tangent |
Create arc tangent to 1, 2 and 3. Create arc tangent point, centerline and dynamic. |
05:03 min |
| View Segment |
|
9/7/2007 |
| 3322 - Create Bolt Hole Circles |
Accessing the Create Bolt Circles function. Setting the Radius, Start Angle, Angle Between and Number of Holes. Using the Create Holes option and setting the diameter. |
1:25 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3501 - 2D Sketcher Project 1 |
Create Rectangle, Create Line Polar, Tangent, Access Fast Point, Create Arc Polar, Create Line Horizontal, Create Fillets, Trim, Partial Chain, Select entities with window “Inside +”, X-form Mirror. |
11:19 min |
| View Segment |
|
9/7/2006 |
| 3502 - 2D Sketcher Project 2 |
Create Circles Center Point, Create Arcs Polar, Access the “Relative” Position Option, Create Arc Polar, Create Circles Tangent to 2 Entities, Trim 3 entity option, Create Fillets. |
9:44 min |
| View Segment |
|
9/7/2006 |
| 3503 - 2D Sketcher Project 3 |
Create Lines Polar, Create Arcs Polar Start/End Angle, Fast Point Access, Create Fillets with preview and trim, Select entities to Rotate, X-form Rotate, Trim 2 entities, Create Arcs Tangent to 3 entities, Create Circle at the Center of an Arc. |
10:26 min |
| View Segment |
|
9/7/2006 |
| 3504 - 2D Sketcher Project 4 |
Create Circles Center Point, Create Arcs Polar, Access the “Relative” Position Option, Create Arc Polar, Create Circles Tangent to 2 Entities, Trim 3 entity option, Create Fillets. |
10:01 min |
| View Segment |
|
9/7/2006 |
| 3505 - 2D Sketcher Project 5 - Part 1 |
Create Line Polar. Create Line Horizontal. Create Line Vertical. Create Circle Center Point. Access "Relative" Location Option. Smart Dimension. |
7:30 min |
| View Segment |
|
9/7/2006 |
| 3506 - 2D Sketcher Project 5 - Part 2 |
Create Line Tangent ant an Angle. Create Line Parallel. X-Form Mirror. Create Arc Polar. Trim 3 Entities. Create Arc Tangent to 3 Entities. Create Circle Edge Point. Create Fillets. |
7:05 min |
| View Segment |
|
9/7/2006 |
| 3506b - 2D Sketcher Project 6 |
Create Circle Center Point. Create Arc Polar. Create Line Horizontal, Vertical, Polar, Parallel. Create Arc Polar Tangent. Create Arc 3 Points Tangent. Create Circle Edge Points Tangent. Fillet, Trim, and Delete Tools. |
8:12 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3235 - Construction Plane |
Creating Geometry using Standard Construction Planes. Changing Construction Planes. Changing C Planes and Z Depths in 2D and 3D Modes. |
8:48min |
| View Segment |
|
9/7/2006 |
| 3237 - Graphics View |
Accessing Graphics Views. Hot Keys. Status bar Access. Right Mouse Button. |
3:53 min |
| View Segment |
|
9/7/2006 |
| 3239 - Named Views, WCS |
WCS, Named Views, For Graphics Viewing and for Geometry Construction. |
12:18 min |
| View Segment |
|
9/7/2006 |
| 6239b - Named Views/Planes for Toolpaths |
Defining program zero, Defining name plane, Axis orientation, Selecting the plane / view origin, Creating a toolpath relative to the new view |
06:33 min |
| View Segment |
|
12/12/2007 |
| 6239c - Multiple Named Views/Planes for Toolpaths Part 1 |
Creating multiple views / planes / work offsets, Axis orientation, Defining a named plane / view using geometry, Selecting the plane / view origin, Creating a toolpath relative to the new view |
11:32 min |
| View Segment |
|
12/12/2007 |
| 6239d - Multiple Named Views/Planes for Toolpaths Part 2 |
Creating multiple views / planes / work offsets, Axis orientation, Defining a named plane / view using geometry, Selecting the plane / view origin, Creating a toolpath relative to the new view |
12:32 min |
| View Segment |
|
12/12/2007 |
| 3240 - Changing The WCS |
Create a Named View and Set the System WCS to recognize it as "Top". |
6:50 min |
| View Segment |
|
9/7/2006 |
| 6240b - Change WCS for Toolpaths - Part 1 |
Part 1: Change the WCS, Assign stock view, Defining a Named plane / view using geometry, Axis orientation, Creating multiple views / planes / work offsets. |
10:27 min |
| View Segment |
|
12/14/2007 |
| 6240c - Change WCS for Toolpaths - Part 2 |
Part 2: Change the WCS, Assign stock view, Defining a Named plane / view using geometry, Axis orientation, Creating multiple views / planes / work offsets. |
10:18 min |
| View Segment |
|
12/14/2007 |
| 6241 - MR1 : Viewsheets |
Overview of the Viewsheet feature, Access the viewsheet function, Create a toolbar, Create a new viewsheet tab, Bookmark a viewsheet, Levels state saved with a bookmark. |
05:40 min |
View Segment
|
|
3/13/2007
|
| Segment |
Description |
Time/Rev Date |
| 3335a - Translate |
X-Form Translate function, Geometry Selection, Move, Copy, or Join, Number of copies, Distance and Direction, Between Points, Polar Coordinates, Preview Option, Fit to screen. |
5:28 min |
| View Segment |
|
9/7/2006 |
| 3335b - Translate Project Function |
Project Geometry on to a Plane or Surface: Geometry by Z depth and CPlane. |
4:13 min |
| View Segment |
|
9/7/2006 |
| 3337 - Mirror |
X-Form Mirror functions, Geometry Selection, X-Form Mirror Dialog Box, Inputting Values for Distance and Direction, Selecting Geometry for Distance and Direction. |
3:10 min |
| View Segment |
|
9/7/2006 |
| 3339 - X-Form Rotate |
X-Form Rotate functions, Geometry Selection, X-Form Rotate Dialog Box, Number of Copies, Selecting the Point of Rotation, Angular Value of the Rotation Interval, Rotate vs. Translate Options, Direction of Rotation, Remove / Restore Copies. |
3:52 min |
| View Segment |
|
9/7/2006 |
| 3340a - X-Form Translate 3D Standard |
Translate between standard views, Geometry Selection, X-Form Translate 3D Dialog Box, Source View, Source reference point, Destination View, Destination reference point. |
1:27 min |
| View Segment |
|
9/7/2006 |
| 3340b - X-Form Translate 3D Auxiliary View |
Translate between Auxiliary views, Geometry Selection, X-Form Translate 3D Dialog Box, Accessing the View Mgr, Creating a New View, Source View, Source reference point, Destination View, Destination reference point. |
2:13 min |
| View Segment |
|
9/7/2006 |
| 6703b - MR2: Design Enhancements - Part 2 |
Xform cancel without undoing. |
00:29 min |
| View Segment |
|
8/8/2007 |
| 6703c - MR2: Design Enhancements - Part 3 |
Xform drag - new options |
01:02 min |
| View Segment |
|
8/8/2007 |
| 3507 - X-Form Translate Project 1 |
X-Form Translate Application, Geometry Selection, Move, Copy, or Join, Distance and Direction, Use New Attributes, Clear Colors, Apply vs. OK. |
4:06 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3348 - Intro to Solids |
Accessing the solids manager, association between wireframe and solids, organizing entities. Using Extrude to create a body, cut a body and editing parameters. |
7:23 min |
| View Segment |
|
9/7/2006 |
| 3348a - 3D Primitives Basics |
Primitive Types. Surface / Solids Option. Creating a Cylinder Primitive. Selecting a Base Point. Radius, Height, Sweep. Orient about an Axis, 2 Points, or a Line. Edit Attribute Control Fields. |
7:19 min |
| View Segment |
|
9/7/2006 |
| 3348b - Creating Primitive Shapes |
More Primitive Types, Solids/Surfaces Option. Block, Cone, Sphere and Torus Shapes. Selecting a Base Point, Entering and Editing Attribute Fields. |
9:35 min |
| View Segment |
|
9/7/2006 |
| 3348c - Solid Primitives Project |
Solid Project Using Only Primitive Solid Shapes: Block, Cylinder, Cone and Sphere. |
13:06 min |
| View Segment |
|
9/7/2006 |
| 3348d - Surface/Solids Shading |
Covers shortcut key access (alt-s), changing colors of shaded models, Mouse Dynamic mode, translucent models, ambient light, chordal height settings, Radial Display Curve Angle. |
7:34 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3348e - Solid Extrude Function - part 1 |
Chaining Direction vs. Extrude Direction. Editing and Regenerating Solids. Distance and Draft Options. Direction Options. |
2:03 min |
| View Segment |
|
9/7/2006 |
| 3348f - Solid Extrude Function - part 2 |
Re-Select Function. Re-Select Ribbon Bar Options. Vector, Translucent Shading, and Shortcut Keys. |
3:28 min |
| View Segment |
|
9/7/2006 |
| 3348g - Solid Extrude Thin Wall Option |
Extrude Boss and Cut Using The Thin Wall Option. Thicken amount and direction options. Combine Operations. |
6:39 min |
| View Segment |
|
9/7/2006 |
| 3348h - Solid Revolve |
Create Solids Using the Revolve Function, cut, add, X-form rotate. |
4:18 min |
| View Segment |
|
9/7/2006 |
| 3348i - Solid Revolve Cut |
Cut Solids Using the Revolve Function |
2:20 min |
| View Segment |
|
9/7/2006 |
| 3348j - Solid Sweep |
Solid Sweep. Geometry required for the operation. |
3:31 min |
| View Segment |
|
9/7/2006 |
| 3348k - Solid Draft Faces |
Draft Solid Faces. Face, Plane, Edge, or Extrude Selection. Draft Angle. Draft Direction. Reference Face / “Hinge Point” Relation. Edit Solid Operations / Regenerate. Propagate Along Tangencies. |
6:47 min |
| View Segment |
|
9/7/2006 |
| 3348L - Solid Shell Function |
Review of Revolve and Extrude add Boss, Sweep, Fillet and Extrude cut. Accessing the Shell feature. Direction and thickness. Order of operations. |
07:38 min |
| View Segment |
|
2/13/2008 |
| 6349 - Boolean Remove Function |
Subtracting One Solid Shape from Another: Accessing the Boolean Remove Feature. Select Target Body / Tool Body. Solid History. Associative Properties. |
05:02 min |
| View Segment |
|
2/18/2008 |
| 6350 - Solid Find Features Function |
Create a Basic History for Imported Solids: Accessing the Solids Find Features Function. Find Holes or Fillets. Create Operations. Minimum Maximum Radius. Edit Circle Diameter Through Analyze Entity. Regenerate Solid Model. Detect and Edit Fillets. Combine Operations. |
04:43 min |
| View Segment |
|
2/18/2008 |
| 3608 - Silhouette Boundary C-Hook |
Overview of the Sihouette Boundary C-Hook. |
2:16 min |
| View Segment |
|
9/7/2006 |
| 6119 - Create Surfaces and Wireframe from a Solid |
Create Curve All Edges and Surface from Solid, Selecting Solid Faces, Surface “Normals”, Edit, Set Normal, Access Levels Manager |
5:09 min |
| View Segment |
|
10/23/2006 |
| 6231 - Solid Layout |
Basic Overview for creating a Multi-View Layout from a Solid: Accessing the Solid Layout Option. Setting Layout Parameters. Selecting Levels. Resetting Parameters. Alignment. Suppressing Hidden Lines. Adding Dimensions. |
04:58 min |
View Segment
|
|
9/11/2007
|
| Segment |
Description |
Time/Rev Date |
| 3512a - Ten Step Project 1 - part 1 |
Basic 10 Step Approach to Programming in Mastercam X, Part 1. |
12:56 min |
| View Segment |
|
9/7/2006 |
| 3512b - Ten Step Project 1 - part 2 |
Basic 10 Step Approach to Programming in Mastercam X, Part 2 |
11:55 min |
| View Segment |
|
9/7/2006 |
| 3401 - Operations Manager Overview |
Toolpath Manager. Object definition (icons). Properties. Editing and Regenerating Operations. Re-Number Tools. Edit Common Parameters. |
12:23 min |
| View Segment |
|
9/7/2006 |
| 3650g - Toolpath manager Display Settings |
Only display selected toolpaths, Only display associated geometry, or Both. |
3:13 min |
| View Segment |
|
9/7/2006 |
| 6222 - Machine Control Definitions |
Overview of the Machine Control Definitions |
6:42 min |
| View Segment |
|
1/8/2007 |
| 6713 - MR2: Machine Definition List |
Manage list options. Customize machine definitions to display. |
00:39 min |
| View Segment |
|
8/9/2007 |
| 3407 - Common Toolpath Parameters - Part 1 |
Tool display Window, Access the tool library, Tool Selection and Filter, Tool Definition / Parameters, Accessing the Tool Manager, Accessing the Speed / Feed Calculator, General description of options available, Force Tool Change Option. |
6:39 min |
| View Segment |
|
9/7/2006 |
| 3408 - Common Toolpath Parameters - Part 2 |
Contour Parameters Page, General description of options available, Tool Height definitions, Cutter Comp Options, Tip Comp, Roll Cutter around Corners, Infinite look ahead, Leave Stock. |
6:47 min |
| View Segment |
|
9/7/2006 |
| 3408d - Cutter Compensation |
Using Cutter Comp in Mastercam, Cutter Compensation in Computer, Cutter Compensation in Control, Cutter Compensation Wear, Cutter Compensation Reverse Wear, Cutter Compensation Off, Lead In / Out, Cutter Comp with Pocket Operations, Tool Diameter Values i |
11:08 min |
| View Segment |
|
9/7/2006 |
| 3408a - Absolute vs. Incremental Depths |
Setting the final Cutting Depth from either Z "0" or setting the final depth to the "Distance in Z from the Geometry" |
7:26 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 3408b - Backplot |
Access Backplot. Select Operations. Toolpath Display. Backplot Options. The Player Bar. Information Display. |
6:05 min |
| View Segment |
|
9/7/2006 |
| 3650f - Backplot Tool Display |
Opacity settings added to Backplot settings dialog boxes. |
2:04 min |
| View Segment |
|
9/7/2006 |
| 6112 - Restrict Drawing for backplot |
A closer look at options with backplot. |
5:38 min |
| View Segment |
|
9/7/2006 |
| 3408c - Verify |
Access Verify. Select Operations. Tool Display Options. Verify Options. Machining Controls. Verbose Mode. Measure Option. Translucent Stock. Color Options. |
9:00 min |
| View Segment |
|
9/7/2006 |
| 6408 - Verify Save File |
Save Verified Toolpath Results as a File. Use STL File as Stock for Verifying Operations. |
03:52 min |
| View Segment |
|
2/26/2008 |
| 3650m - STL Compare |
Reset Tolerance and Stock to Leave. |
3:45 min |
| View Segment |
|
9/7/2006 |
| 3650h - User Defined Speeds / Feeds |
Manually set feeds and speeds. |
4:15 min |
| View Segment |
|
9/7/2006 |
| 3607 - Toolpath Editor |
Overview of the new Toolpath Editor, Step to a Tool Position to be Edited, Select the Tool Position to be Edited. Delete a “Section” from a toolpath, Edit at a Point of a toolpath, Change Z height and Feed Rate. |
3:48 min |
| View Segment |
|
9/7/2006 |
| 3650e - Toolpath Manager |
Setting the default names for Machine Groups, Toolpath Groups, and the NC File Name. |
1:49 min |
| View Segment |
|
9/7/2006 |
| 6240f - Creating a Custom Tool Library |
Accessing the tool manager; Copying tools from existing libraries; Creating & naming a tool library; Saving & editing tools in a custom library. |
08:36 min |
| View Segment |
|
4/29/2008 |
| 6240d - Posting Multiple NC Programs Part1 |
Part 1: Change toolpath group names, change material, Renumber tool numbers, Recalculate speeds and feeds, Edit common parameters, Tool plane assignments, NC File name. |
07:13 min |
| View Segment |
|
4/28/2008 |
| 6240e - Posting Multiple NC Programs Part2 |
Part 2: Assigning multiple program numbers, Change NC file name, Setup sheet type, Mutiple setup sheets, Post process multiple NC programs. |
07:48 min |
View Segment
|
|
4/28/2008
|
| Segment |
Description |
Time/Rev Date |
| 3411a - Pocket Basics |
Pocket basics, Geometry selection, Pocket final depth, Depth Cuts, Cutting Method, Machine Finish Pass Final / All Depths. |
6:35 min |
| View Segment |
|
9/7/2006 |
| 3411b - Pocket Incremental Depths |
Pocket Incr. Depths, Geometry selection, Analyze Entity, C-plane Chaining, Edit a Cutting Tool, Incremental vs Absolute Depths. |
5:13 min |
| View Segment |
|
9/7/2006 |
| 3411c - Pocket Finish Passes |
Pocket Finish Passes, Depth Cuts By Pocket, Depth Cuts By Depth, Machine Finish Pass only at Final Depth, Machine Finish Pass after Roughing all Pockets. |
4:08 min |
| View Segment |
|
9/7/2006 |
| 3411e - Pocket Plunge Entry in a Hole |
Pocket Plunge Entry in a Hole, Chain Geometry for Pocketing, Including Points with the pocket chains. |
3:02 min |
| View Segment |
|
9/7/2006 |
| 3411f - Pocket Additional Finish Operation |
Pocket Additional Finish Operation, Chain Geometry for Pocketing, Including Points with the pocket chains, Create a Pocket Toolpath, Creating a separate finish operation, Lead In / Out Parameters, Access Verify Configure Page, Use Cylinder shaped stock, C |
4:36 min |
| View Segment |
|
9/7/2006 |
| 3411g - Pocket Face Toolpath |
Pocket Face toolpath, Geometry required for Pocket Facing, Setting toolpath Depth, Entrance / Exit Parameters, Overlap Percentage, Finish outer Boundary, Inside Out / Outside In. |
10:55 min |
| View Segment |
|
9/7/2006 |
| 3411h - Pocket Island Face Toolpath |
Pocket Island Face toolpath, Geometry required for Pocket Island Facing, Approach / Exit Distance, Overlap Percentage, Stock Above Island, Depth Cuts. |
4:17 min |
| View Segment |
|
9/7/2006 |
| 3411i - Pocket Re-Machining |
Pocket Re-Machining, Generating a Pocket Re-Machine Toolpath, Copying an existing toolpath, Setting Re-Machine Parameters, Clearance Values, How the toolpath is computed, Cut where needed vs. complete finish pass. |
6:46 min |
| View Segment |
|
9/7/2006 |
| 3411j - Open Pocket |
Pocket type, Partial chain selection, Roughing and Finishing, Open pocket cutting method, Lead in / Lead out. |
10:26 min |
View Segment
|
|
8/12/2008
|
| Segment |
Description |
Time/Rev Date |
| 3413a - 2D Contour Function |
Select default machine type, Load 2D Toolpath Toolbar, Define Stock, Creating a Contour Toolpath, Chaining Geometry, Access Tool Library / tool selection, Setting Contour Parameter Values, Cutter Comp Selection, Break Thru, Basic Lead in / out, Back Plot. |
12:23 min |
| View Segment |
|
9/7/2006 |
| 3413b - 2D Contour - Lead In / Out |
Overview of Lead In / Out options, Line / Arc options, Start at Midpoint, Overlap, Adjust Start / End of Contour, Enter / Exit on 1st / Last depth cut only, Override feed rate, Use Entry / Exit Point. |
5:28 min |
| View Segment |
|
9/7/2006 |
| 3413c - 2D Contour - Depthcuts / Multipass |
Overview of Depthcuts / Multipass options, Maximum Rough Step, Number of Finish Cuts, Finish Step, By Contour / By Depth, Rough Pass Number / Spacing, Finish Pass Number / Spacing, Machine Finish Pass Final / All Depths. |
11:35 min |
| View Segment |
|
9/7/2006 |
| 3413d - 2D Contour - 2D Chamfer |
Chain Selection / Direction, Tool Selection, Tool Library Filter, Depth Value, Accessing 2D Chamfer Contour Type, Setting Chamfer Width / Tip Offset, Verify Round Stock Display. |
5:25 min |
| View Segment |
|
9/7/2006 |
| 3413e - 2D Contour - Chamfer Supplement |
Chamfer Supplement, Toolpath Models Designed with Chamfers, Profile Chain Selection, Depth Value Selection. |
3:41 min |
| View Segment |
|
9/7/2006 |
| 6416 - Contour 3D Chamfer |
3D Chamfer parameters, Toolpath models designed with chamfer, Edge curves on a solid model, Profile chain selection |
5:41 min |
| View Segment |
|
7/6/2007 |
| 6715a - MR2: 2d High Speed Peel Mill Toolpath 1 |
Creating a Peel Mill Toolpath. Toolpath Driven with 2 Entities. Cut Parameters. Trochoidal Parameters. Rough Offset, Rounding Radius, Stepover. Back Feedrate. Finish Pass. Feedrate Override. |
08:26 min |
| View Segment |
|
8/15/2007 |
| 6715b - MR2: 2d High Speed Peel Mill Toolpath 2 |
Creating a Peel Mill Toolpath. Toolpath Driven with 1 Entities. Trochoidal Parameters. Single Chain Only. |
03:53 min |
| View Segment |
|
8/15/2007 |
| 6414 - MR1 : 2D Contour Z Oscillation |
Contour toolpath options, Access the Z oscillation option, Motion and Distance Options. |
01:37 min |
| View Segment |
|
3/22/2007 |
| 6415 - Tab Placement Auto |
Locating tabs on a Profile, Tab width and thickness, Number of tabs along Profile |
2:54 min |
| View Segment |
|
3/12/2007 |
| 6415b - Tab Placement Manual |
Manual options for locating a tab on a profile, Manual tab positioning, Using square points. |
3:18 min |
| View Segment |
|
3/12/2007 |
| 6415c - Tab Placement Settings |
Options available on the tabs settings page, Point geometry tab positioning, Automatic tabs, Tab motions. |
1:03 min |
| View Segment |
|
3/12/2007 |
| 6415d - MR1 : Tab Placement Auto By Distance |
Max distance between tabs, Automatic placement. |
01:30 min |
| View Segment |
|
3/12/2007 |
| 6417 - Contour Letters |
Using the Contour Toolpath to Engrave Letters. Window Selection of geometry. Cutter Selection. Cutter Compensation Type. Lead In, Lead Out setting. Convert Drafting Note to Geometry for Toolpath Selection. |
07:42 min |
| View Segment |
|
1/29/2008 |
| 3518 - Contour Project 2D |
Creating a Contour toolpath, Chaining Geometry, Lead In/Out, Multi-Pass, Shorten/Extend Contours, Break Function, Leave Stock. |
4:34 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 6649 - System Configuration Overview |
Changing, Creating and Available Options in System Configuration |
3:22 min |
| View Segment |
|
9/7/2006 |
| 3650i - Chaining Default Options, and Level Descriptor |
New Options for setting User Defaults for Chaining. Display Level Descriptor on the screen |
1:28 min |
| View Segment |
|
9/7/2006 |
| 6225 - Setting Up Autosave |
Accessing Autosave through Settings / Configuration and Pefered parameter settings. |
5:36 min |
| View Segment |
|
1/8/2007 |
| 3650j - MCX Backup Files |
Save backup files in a user-specified backup directory. |
2:53 min |
| View Segment |
|
9/7/2006 |
| 3650n - Browse for External Communications |
Starting with MR2, Mastercam will allow you to browse for an external communications package. |
0:41 min |
| View Segment |
|
9/7/2006 |
| 6104 - Isometric View / C-Plane Update |
Access Cad settings page, update Cplane and Tplane, reset Cplane |
5:11 min |
| View Segment |
|
9/7/2006 |
| 6106 - Ribbon Bar Modality |
Access the Ribbon Bar Modality option, selection of Ribon Bar options |
2:38 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 6113 - Introduction to File Tracking |
File Tracking Options and Criteria |
5:35 min |
| View Segment |
|
10/23/2006 |
| 6113b - MR1 : File Tracking additional Options |
Utilizing the Add Folders option within File Tracking to specify additional locations for Mastercam to search for new revisions. |
02:45 min |
| View Segment |
|
3/19/2007 |
| 6114 - Change Recognition Part 1: Overview of the Change Recognition Feature |
Access through File Tracking, Change Recognition Interface, Color Codes: Up-to-Date, Dirty, and Affected, Geometry Display Options, Override Geometry Colors. |
5:37 min |
| View Segment |
|
10/23/2006 |
| 6115 - Change Recognition Part 2: Applying the Change Recognition Feature |
Selecting Operations, Geometry Display Options, Edit Geometry, Re-Chaining Geometry, Regenerating Operations, Final Geometry Cleanup, Operations Manager Display Options, Only Display Associative Geometry, Blank and Un-Blank Screen Option. |
7:02 min |
| View Segment |
|
10/23/2006 |
| 6109 - Change Recognition: Applying Change Recognition to a Solid Model |
Targeting a Specific File, Evaluating Changes between CAD Files, Reselecting Solid Drive “Surfaces”, Regenerating Updated Toolpaths, “Cleaning Up” Excess Geometry, Saving The Updated File |
4:50 min |
| View Segment |
|
10/23/2006 |
| 6109b - MR1 : Change Recognition Orientation Options |
Covers the orientation/re-positioning options available within Change Recognition which allow you to re-position your incoming file with a variety of different methods to ensure a successful Change Recognition. |
09:05 min |
View Segment
|
|
3/19/2007
|
| Segment |
Description |
Time/Rev Date |
| 3632 - Intro to HST Machining |
Introduction to the new High Speed Toolpaths in MR-1. |
1:53 min |
| View Segment |
|
9/7/2006 |
| 3633 - Overview of HST Machining |
How to Create High Speed Toolpaths. Selecting Solids for Machining. New Interface. Basic Parameters. Quick View Settings Window. Copy a Toolpath. Change Toolpath Type and Style. Loop Transitions between Passes. |
7:09 min |
| View Segment |
|
9/7/2006 |
| 3634 - Core Roughing |
This new roughing motion ensures climb cutting almost all the time and plunges off of the part to the next depth whenever possible. Additional cuts can be added based on a maximum profile stepover set by the user. Features covered: Setting Cut Parameters. |
4:08 min |
| View Segment |
|
9/7/2006 |
| 3650p - Rest Roughing |
Rest Roughing toolpath has been added to the HST toolpaths. You can now select a previous operation, all. previous operations, a CAD file (including STL), or a roughing tool. |
1:53 min |
| View Segment |
|
9/7/2006 |
| 3635 - Area Clearance |
Better suited for roughing cavities and has similar entry/exit intelligence to Core roughing. |
2:44 min |
| View Segment |
|
9/7/2006 |
| 6636 - HST Rest Roughing |
Access HST Rest Roughing, Rest material parameters, Previous ops / Tool diameter / Cad file, Adjustments to remaining stock. |
6:46 min |
| View Segment |
|
9/25/2006 |
| 3642 - Raster |
Similar to the current finish parallel toolpath, now with improved entry/exit motion. Applying the Raster Finish Toolpath. Steep / Shallow Angle Parameters. Linking Parameters. Step-over Values. Cut Parameters / Machining Angle. Using a Containment Bounda |
8:46 min |
| View Segment |
|
9/7/2006 |
| 3641 - Scallop |
Similar to the existing scallop toolpath, but with better transition motion. Applying the Scallop Finish Toolpath. Stepover / Scallop Height Up Milling / Down Milling / Zig Zag. Steep / Shallow Angle Parameters. Approximate Starting Point. Save Verify Res |
8:09 min |
| View Segment |
|
9/7/2006 |
| 6652 - Radial |
Radial Finish High Speed Toolpaths |
5:36 min |
| View Segment |
|
9/7/2006 |
| 6654 - Spiral |
Spiral Finish High Speed Toolpaths |
7:44 min |
| View Segment |
|
9/7/2006 |
| 3638 - Horizontal |
Automatically calculates and machines only the flat surfaces. The user also has control over the range of depths to be machined. |
5:26 min |
| View Segment |
|
9/7/2006 |
| 3639 - Waterline |
This is a “constant Z” toolpath with smooth intelligent motion. Fewer retract moves keeps the cutter in contact with the part more often. |
7:12 min |
| View Segment |
|
9/7/2006 |
| 6712 - MR2: HST Waterline Arc Moves |
HST 3D Arc move enhancements. Waterline 3D Arc move transitions. 3D Arcs supported in Helix and Ramp for: Core roughing, Area clearance, Rest roughing and Horizontal area. |
01:01 min |
| View Segment |
|
8/9/2007 |
| 3640 - Pencil Cutting |
Machines just the “creases” of the part or the entire part with a unique and natural cutting motion. Applying the Pencil Finish Toolpath. Limit Number of Offsets. Steep / Shallow Angle Parameters. Analyze Dynamic. Step-over Parameter. Overthickness Parame |
7:25 min |
| View Segment |
|
9/7/2006 |
| 3636 - Restmill Setting |
Using the Restmill Option in a Roughing Op. Save Verify Results as an STL File. Use an STL File as Stock for Verify. Enter a ? for “Data Entry” Shortcut Keys. Limiting “Z” Depths. |
6:13 min |
| View Segment |
|
9/7/2006 |
| 3637 - Adaptive Stepdown |
Applying the Adaptive Stepdown Method. Which Toolpaths are Constant Z Cutting. Accessing the Add-Cuts Option. Min. Stepdown vs. Max. Profile Values. |
4:59 min |
| View Segment |
|
9/7/2006 |
| 3643 - Arc Filter |
Accessing Filter Parameters. Filter Ratio. Filter Tolerance. Cut Tolerance. Total Tolerance. Arc Planes G17, G18, G19. How Filtering Effects NC Code Size. How Filtering Effects Cut Accuracy. |
9:04 min |
| View Segment |
|
9/7/2006 |
| 3608 - Silhouette Boundary C-Hook |
Overview of the Sihouette Boundary C-Hook. |
2:16 min |
| View Segment |
|
9/7/2006 |
| 3650q - HST Stock to Leave on Floors and Walls |
Setting the default to FastPoint Mode |
2:11 min |
| View Segment |
|
9/7/2006 |
| 6117 - HST Minimize Tool Burial |
Produce a Core Roughing Toolpath with Trochoidal Loops, Cut Parameters / Minimize Burial. |
2:13 min |
| View Segment |
|
10/23/2006 |
| 6617b - MR1 : HST Roughing Trochoidal Controls |
Control page for trochoidal motion; HST area clearance, Minimize burial; Initial, Retry and Minimal loop radius; Feed adjustment. |
03:43 min |
| View Segment |
|
3/13/2007 |
| 6618 - MR1 : HST Tool Holder Definition and clearance |
Tool holder options; Selecting a tool holder; Entering clearance distance; Gouge checking the holder. |
03:27 min |
| View Segment |
|
3/13/2007 |
| 6656 - Controlling Toolpath Boundaries |
Drive and Check Surface Functionality, Selection of Drive and Check Surfaces, Containment Boundary Selection / Options. |
8:58 min |
| View Segment |
|
11/1/2006 |
| 6658 - HST Drive, Checked, Containment Part 1 |
Utilizing Checked Surfaces and Containment Boundaries, Selecting a Checked Surface, Selecting a Containment Boundary, The difference between them. |
4:05 min |
| View Segment |
|
10/23/2006 |
| 6659 - HST Drive, Checked, Containment Part 2 |
Utilizing Checked Surfaces and Containment Boundaries, Selecting a Checked Surface, Selecting a Containment Boundary, The difference between them. |
5:35 min |
| View Segment |
|
10/23/2006 |
| 6119 - Create Surfaces and Wireframe from a Solid |
Create Curve All Edges and Surface from Solid, Selecting Solid Faces, Surface “Normals”, Edit, Set Normal, Access Levels Manager |
5:09 min |
View Segment
|
|
10/23/2006
|
| Segment |
Description |
Time/Rev Date |
| 3644 - HST Combo Project Part 1 |
Create New View / Origin. Stock Setup. HST Core Rough. Arc Filtering. Backplot Settings. HST Restmill. Verify with STL Stock Model. |
9:11 min |
| View Segment |
|
9/7/2006 |
| 3645 - HST Combo Project Part 2 |
HST Horizontal Finish. Modify Parameters. HST Waterline Finish. HST Scallop Finish. Save Verify Results as an STL Model. |
7:19 min |
| View Segment |
|
9/7/2006 |
| 3646 - HST Combo Project Part 3 |
HST Pencil Finish. Modify Parameters. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code.” |
5:27 min |
| View Segment |
|
9/7/2006 |
| 3647a - HST Project 2 Roughing Part 1 |
Create New View / Origin. Stock Setup. Face Toolpath. HST Area Clearance. Selecting a Containment Boundary. Backplot and Verify Toolpaths. Save Verify Results as an STL File. |
7:07 min |
| View Segment |
|
9/7/2006 |
| 3647b - HST Project 2 Roughing Part 2 |
Rough Rest Passes Option. Create Rest Passes using progressively smaller diameter tools to further rough out the model. Save Verify Results as an STL File. Verify using STL Stock Model |
7:12 min |
| View Segment |
|
9/7/2006 |
| 3648a - HST Project 2 Finishing Part 1 |
Create New Toolpath Group. Horizontal Area Finishing Toolpath. Waterline Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. |
8:01 min |
| View Segment |
|
9/7/2006 |
| 3648b - HST Project 2 Finishing Part 2 |
Pencil Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code” |
3:45 min |
| View Segment |
|
9/7/2006 |
| 3648c - HST Project 2 Finishing Part 3 |
Pencil Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code” |
3:45 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 6100 - Introduction to Streamingteacher |
IMPORTANT! PLEASE WATCH THIS VIDEO: Getting around in the Table of Contents, Using Filters and Search capabilities. |
6:57 min |
| View Segment |
|
9/7/2006 |
| 6108 - File Open, Save dialog boxes |
Access and Options for File Open and Save: File Descriptor, Filtering / Converting, Save As, File Type Options. |
5:03 min |
| View Segment |
|
9/7/2006 |
| 6226 - Quick Mask |
Using the Quick Mask Feature and All or Only Selection |
4:52 min |
| View Segment |
|
9/7/2006 |
| 6649 - System Configuration Overview |
Changing, Creating and Available Options in System Configuration |
3:22 min |
| View Segment |
|
9/7/2006 |
| 6106 - Ribbon Bar Modality |
Access the Ribbon Bar Modality option, selection of Ribon Bar options |
2:38 min |
| View Segment |
|
9/7/2006 |
| 6113 - Introduction to File Tracking |
File Tracking Options and Criteria |
5:35 min |
| View Segment |
|
10/23/2006 |
| 6114 - Change Recognition Part 1: Overview of the Change Recognition Feature |
Access through File Tracking, Change Recognition Interface, Color Codes: Up-to-Date, Dirty, and Affected, Geometry Display Options, Override Geometry Colors. |
5:37 min |
| View Segment |
|
10/23/2006 |
| 6115 - Change Recognition Part 2: Applying the Change Recognition Feature |
Selecting Operations, Geometry Display Options, Edit Geometry, Re-Chaining Geometry, Regenerating Operations, Final Geometry Cleanup, Operations Manager Display Options, Only Display Associative Geometry, Blank and Un-Blank Screen Option. |
7:02 min |
| View Segment |
|
10/23/2006 |
| 6109 - Change Recognition: Applying Change Recognition to a Solid Model |
Targeting a Specific File, Evaluating Changes between CAD Files, Reselecting Solid Drive “Surfaces”, Regenerating Updated Toolpaths, “Cleaning Up” Excess Geometry, Saving The Updated File |
4:50 min |
| View Segment |
|
10/23/2006 |
| 6652 - Radial |
Radial Finish High Speed Toolpaths |
5:36 min |
| View Segment |
|
9/7/2006 |
| 6117 - HST Minimize Tool Burial |
Produce a Core Roughing Toolpath with Trochoidal Loops, Cut Parameters / Minimize Burial. |
2:13 min |
| View Segment |
|
10/23/2006 |
| 6654 - Spiral |
Spiral Finish High Speed Toolpaths |
7:44 min |
View Segment
|
|
9/7/2006
|
| Segment |
Description |
Time/Rev Date |
| 6316b - MR1 : Line Tangent To a Point |
Create a line defining the tangent point of an arc, Selecting an arc or spline, Choosing the tangent point, Define the line length. |
02:25 min |
| View Segment |
|
3/13/2007 |
| 6414 - MR1 : 2D Contour Z Oscillation |
Contour toolpath options, Access the Z oscillation option, Motion and Distance Options. |
01:37 min |
| View Segment |
|
3/22/2007 |
| 6415d - MR1 : Tab Placement Auto By Distance |
Max distance between tabs, Automatic placement. |
01:30 min |
| View Segment |
|
3/12/2007 |
| 6113b - MR1 : File Tracking additional Options |
Utilizing the Add Folders option within File Tracking to specify additional locations for Mastercam to search for new revisions. |
02:45 min |
| View Segment |
|
3/19/2007 |
| 6109b - MR1 : Change Recognition Orientation Options |
Covers the orientation/re-positioning options available within Change Recognition which allow you to re-position your incoming file with a variety of different methods to ensure a successful Change Recognition. |
09:05 min |
| View Segment |
|
3/19/2007 |
| 6617b - MR1 : HST Roughing Trochoidal Controls |
Control page for trochoidal motion; HST area clearance, Minimize burial; Initial, Retry and Minimal loop radius; Feed adjustment. |
03:43 min |
| View Segment |
|
3/13/2007 |
| 6618 - MR1 : HST Tool Holder Definition and clearance |
Tool holder options; Selecting a tool holder; Entering clearance distance; Gouge checking the holder. |
03:27 min |
| View Segment |
|
3/13/2007 |
| 6241 - MR1 : Viewsheets |
Overview of the Viewsheet feature, Access the viewsheet function, Create a toolbar, Create a new viewsheet tab, Bookmark a viewsheet, Levels state saved with a bookmark. |
05:40 min |
View Segment
|
|
3/13/2007
|
| Segment |
Description |
Time/Rev Date |
| 5006 - Art - Learning Tools |
Art tutorial, Movies, Help system and What's new document. |
10:35 min |
| View Segment |
|
3/23/2007 |
| 5007 - Art - Orientation and Setup |
Art Setup, Toolbar, Text menu, Art manager: Icons, History tree, Elements, Parameters geometry |
12:02 min |
| View Segment |
|
3/23/2007 |
| 5008 - Art - Process Flow Antz - Part 1 |
Organic surface, Cross sections: Library and Custom, Adjust Ridge. |
10:15 min |
| View Segment |
|
3/23/2007 |
| 5009 - Art - Process Flow Antz - Part 2 |
Create dome, Textures: Weave, Brick and Sand, Application style: Sub |
10:15 min |
| View Segment |
|
3/23/2007 |
| 5010 - Art - Toolpath Antz - Part 3 |
Preparation: Model under Z, Select machine, Select tool, Toolpath parameter, Toolpath styles, Solid model. |
11:17 min |
| View Segment |
|
3/23/2007 |
| 5011 - Art - Create Scroll Works Model-3 |
Project flow, Surfaces: Organic and Swept, Chaining: Single and Nested. |
09:45 min |
| View Segment |
|
3/23/2007 |
| 5012 - Art - Application Styles Celtic Band |
Selecting chains, Intersections, Application styles: Add, Add cut, Blend, Linking Surfaces. |
09:21 min |
| View Segment |
|
3/23/2007 |
| 5013 - Art - Trace Image Dragon - Part 1 |
Trace image, Controls: Spline edit. |
09:37 min |
| View Segment |
|
3/23/2007 |
| 5014 - Art - Nested Chains Dragon - Part 2 |
Nested chains, Resolution, Suppress text, Save cross section. |
09:50 min |
| View Segment |
|
3/23/2007 |
| 5015 - Art - Design Library - Part 1 |
Design library: Dynamic controls: Translate, Rotate and Scale, Cabinet door. |
10:48 min |
| View Segment |
|
3/23/2007 |
| 5016 - Art - Design Library - Part 2 |
Copy: Dynamic controls: Translate, Rotate and Scale copy paste, Paste, Art surface library. |
06:50 min |
| View Segment |
|
3/23/2007 |
| 5017 - Art - Art Toolpaths - Part 1 |
Create a custom V-tool and create a custom tool library. |
08:50 min |
| View Segment |
|
3/23/2007 |
| 5018 - Art - Art Toolpaths - Part 2 |
Cutting methods including - Optimized parallel horizontal, Optimized rectangle spiral, Ellipse up the edge and up to corner, Parallel horizontal and vertical, Parallel at a given angle, Radial to edge and corner, Rectangle spiral rounded corners and spiral. |
12:22 min |
| View Segment |
|
3/23/2007 |
| 5019 - Art - Art Toolpaths - Part 3 |
Cutting methods including - Parallel up to boundry, Parallel spiral up to boundry, Hybrid up to boundry, Using ...up to boundry. |
11:20 min |
| View Segment |
|
3/23/2007 |
| 5020 - Art - ABS Unwrapped Cylinder |
Controls, Set up for toolpath, Toolpath styles. |
08:31 min |
| View Segment |
|
3/23/2007 |
| 5021 - Art - Create Ring Text Band - Part 1 |
Text band including: Unwrapped art base surface, Create geometry, Create surfaces. |
11:46 min |
| View Segment |
|
3/23/2007 |
| 5022 - Art - Create Ring Text Band - Part 2 |
Toolpath: Tool selection, Toolpath parameters, Rotary orientation X, Toolpath cutting methods, Backplot, Verification. |
07:52 min |
| View Segment |
|
3/23/2007 |
| 5023 - Art - Image to Surface - Part 1 |
A good picture, Gray scale conversion, Controls. |
09:24 min |
| View Segment |
|
3/23/2007 |
| 5024 - Art - Image to Surace - Part 2 |
Editing: Flattening and Smoothing, Mannequins. |
09:05 min |
| View Segment |
|
3/23/2007 |
| 5025 - Art - Hybrid Modeling - Import STL |
Create solid model, Create surface plane, STL to Art base surface, Add art entity, Export STL. |
08:44 min |
| View Segment |
|
3/23/2007 |
| 5026 - Art - Multiple Art Base Surfaces |
Multiple ABS: Creation and Toolpath |
09:48 min |
| View Segment |
|
3/23/2007 |
| 5027 - Art - Surface Types |
Swept, Border plane, Swept 2 ends, Incline, Ellipse. |
11:18 min |
| View Segment |
|
3/23/2007 |
| 5028 - Art - Tips |
Blend edge, Flatten, Smooth, Create surface to: Inside / Outside. |
09:21 min |
| View Segment |
|
3/23/2007 |
| 5029 - Art - Engrave Toolpath |
V-Cutter, Engrave styles: Chisel, Emboss, Emboss/Rough, Emboss/Rough/Chisel. |
12:22 min |
View Segment
|
|
3/23/2007
|
| Segment |
Description |
Time/Rev Date |
| 3650g - Toolpath manager Display Settings |
Only display selected toolpaths, Only display associated geometry, or Both. |
3:13 min |
| View Segment |
|
9/7/2006 |
| 6222 - Machine Control Definitions |
Overview of the Machine Control Definitions |
6:42 min |
| View Segment |
|
1/8/2007 |
| 6801 - Operations manager – Lathe specifics |
Access the Toolpath Manager, Machine Groups, Toolpath Groups, Toolpath Operations, Expand / Collapse, Move / Copy / Cut, Insert Arrow, Toolpath Manager Tool Bar, Right Click Options, Display Options. |
11:05 min |
| View Segment |
|
4/3/2007 |
| 6802 - Lathe Coordinate System |
Lathe Diameter, Lathe Radius, Creating a Simple Part, Analyze Entity, General Machine Parameter Defaults. |
05:40 min |
| View Segment |
|
4/2/2007 |
| 6802b - Lathe Coordinate System Supplemental |
Access the View Manager, Lathe Z = World Z. |
01:25 min |
| View Segment |
|
4/2/2007 |
| 6803 - Stock Definition and Chuck Definition |
Stock Properties, Stock Geometry Parameters, Use Margins, Chuck Properties, Clamping Method, Chuck Position, Preview Display Options. |
6:55 min |
| View Segment |
|
3/26/2007 |
| 6805 - Stock Update / Stock preview, tracking remaining stock , red arrow |
Operations Manager Red Arrow, Updating Stock display, Lathe Stock Preview. |
5:23 min |
| View Segment |
|
3/26/2007 |
| 6804 - Lathe common toolpath parameters - Part 1 |
Tool Libraries, Tool Selection, Tool Filter, Tool Manager. |
05:02 min |
| View Segment |
|
4/3/2007 |
| 6804b - Lathe common toolpath parameters - Part 2 |
Tool Information, Number / Offset / Station, Speed and Feed, Definitions, Tool Parameters, Home Position, Force Tool Change, Comments. |
07:11 min |
| View Segment |
|
4/3/2007 |
| 6807 - Tool Definition |
Defining a tool by using the insert and holder libraries, Tool Types, Insert Selection and Definition, Tool Code Reference, Insert Catalog, Holder Selection and Definition, Holder Catalog, Tool Parameters, Draw Tool, Tool Setup, Home Position from Tool |
08:21 min |
| View Segment |
|
4/9/2007 |
| 6808 - Custom Tool Definition |
Geometry Attribute Requirements. Separate File / Separate Level, Create New Tool / Custom, Cut / Plunge Direction, Tool Orientation in the Turret, Tool Clearance, Scan Tool Geometry, Draw Tool, Tool Setup. |
6:07 min |
View Segment
|
|
4/23/2007
|
| Segment |
Description |
Time/Rev Date |
| 6809 - Lathe Project - Face |
Access the Lathe Face Toolpath, Tool Selection. Face Parameters, Use Stock, Select Points, Backplotting the Toolpath. |
6:08 min |
| View Segment |
|
3/26/2007 |
| 6809b - Lathe Project - Rough |
Access the Lathe Rough Toolpath, Selecting Toolpath Geometry, Tool Selection, Rough Parameters, Overlap Parameters, Lead In / Lead Out, Extend / Shorten Contour. |
5:39 min |
| View Segment |
|
3/26/2007 |
| 6809c - Lathe Project - Finish |
Access the Lathe Finish Toolpath, Selecting Toolpath Geometry, Tool Selection, Finish Parameters, Lead In / Lead Out, Extend / Shorten Contour, Verify Toolpath. |
4:18 min |
| View Segment |
|
3/26/2007 |
| 6809d - Lathe Project - Drill |
Access the Lathe Drill Toolpath, Tool Selection, Depth Selection, Simple Drill No Peck, Peck Drill Parameters. |
3:47 min |
| View Segment |
|
3/26/2007 |
| 6809e - Lathe Project - Rough Bore |
Access Lathe Rough Toolpath, Geometry Selection, Tool Selection, Rough Parameters for Inside Diameter, Lead In / Lead Out, Stock Recognition Option, Use Stock for Outer Boundary, Semi Finish. |
6:05 min |
| View Segment |
|
3/26/2007 |
| 6809f - Lathe Project - Finish Bore |
Access Lathe Finish Toolpath, Geometry Selection, Tool Selection, Finish Parameters for Inside Diameter, Tool Collision Warning, Lead In / Lead Out. |
06:14 min |
| View Segment |
|
4/2/2007 |
| 6809g - Lathe Project - Cutoff |
Access Lathe Cutoff Toolpath, Geometry Selection, Tool Selection, Select Cutoff Boundary Point, Cutoff Parameters. “Cut To” Parameters, Corner Geometry. |
5:34 min |
View Segment
|
|
4/2/2007
|
| Segment |
Description |
Time/Rev Date |
| 6812 - Lathe Toolpath Groove - Part 1 |
Access Lathe Cutoff Toolpath, Geometry Selection, Tool Selection, Groove Rough Parameters, Cut Direction, Groove Walls, Peck Groove / Depth Cuts, Groove Finish Parameters, Overlap. |
07:05 min |
| View Segment |
|
4/2/2007 |
| 6812b - Lathe Toolpath Groove - Part 2 |
Access Lathe Groove Toolpath, Point Selection Definition, Tool Selection, Groove Shape Parameters, Groove Chamfer, Quick Set Corners. |
03:13 min |
| View Segment |
|
4/2/2007 |
| 6813 - Lathe Toolpath Thread Basics |
Access Lathe Thread Toolpath, Select Tool, Thread Shape Parameters Basics, Thread Cut Parameters Basics, Determine Cut Depths, Update Stock |
05:53 min |
| View Segment |
|
4/2/2007 |
| 6813b - Lathe Thread Shape Parameters |
Manually Input Thread Shape Data, Select from Table, Compute from Formula, Allowance / Table / Class, Adjusted Diameters, Draw Thread. |
04:24 min |
| View Segment |
|
4/2/2007 |
| 6813c - Lathe Thread NC Code Output |
NC Code Options: Canned, Longhand, Box, Alternating. |
04:03 min |
View Segment
|
|
4/2/2007
|
| Segment |
Description |
Time/Rev Date |
| 6815 - Stock Flip Part 1 - Basics |
Access Misc. Ops. / Lathe Stock Flip, Selecting Geometry to Flip, Level Option, Stock Position, Chuck Position, Positioning the Red Arrow, NC Code Output. |
05:52 min |
| View Segment |
|
4/2/2007 |
| 6815b - Stock Flip Part 2 - OD to ID Flip |
Select Geometry for Flip, Stock Position, Chuck Position, Preparation for OD to ID Flip |
04:57 min |
| View Segment |
|
4/2/2007 |
| ws1008a - Workshop: Lathe Tooling Part 1 |
Lathe Tool setup. Holder & Insert Libraries. Modifying existing tools. Creating custom tools. Part 1 (Un-edited screen capture of a training webinar) |
23:48 min |
| View Segment |
|
9/12/2007 |
| ws1008b - Workshop: Lathe Tooling Part 2 |
Lathe Tool setup. Holder & Insert Libraries. Modifying existing tools. Creating custom tools. Part 2 (Un-edited screen capture of a training webinar) |
23:08 min |
| View Segment |
|
9/12/2007 |
| ws1011a - Workshop: Lathe Programming - Part 1 |
Unique aspects of Mastercam Lathe. Orienting your part file for Turning. Setup of Stock and Chuck. Programming the Part. |
33:05 min |
| View Segment |
|
3/19/2008 |
| ws1011b - Workshop: Lathe Programming - Part 2 |
Unique aspects of Mastercam Lathe. Orienting your part file for Turning. Setup of Stock and Chuck. Programming the Part. |
28:47 min |
View Segment
|
|
3/19/2008
|
| Segment |
Description |
Time/Rev Date |
| 6500 - Router: Geometry Nesting - #1 |
Nesting overview: Geometry and Toolpath nesting, Nesting modes, X-form menu, Sheet and part parameters and options |
6:32 min |
| View Segment |
|
7/6/2007 |
| 6501 - Router: Geometry Nesting - #2 |
Nesting overview continued: Adding and Deleting parts, Clusters, Minimum and Fill Quantity, Step Angle, Rectangular / True Shape Nesting, Grain Direction, Labels. |
6:00 min |
| View Segment |
|
7/6/2007 |
| 6502 - Router: Geometry Nesting - #3 |
Nesting overview continued: Nesting configuration, Result display, Vertical / Horizontal cutoff, Nesting Report. |
7:49 min |
| View Segment |
|
7/6/2007 |
| 6503 - Toolpath Nesting Overview |
Toolpath Nesting Parameters, Clusters, Sorting methods, Stop Conditions, Work offset and Onion skin. |
06:37 min |
| View Segment |
|
7/9/2007 |
| 6503b - Router: Toolpath Nesting - Part 2 |
More on Toolpath Nesting Parameters, Maximize material use, Nesting configuration, Sheet parameters. |
03:18 min |
| View Segment |
|
12/3/2007 |
| 6504 - Router: Aggregate Heads |
Defining Aggregate Head applications, Adding stations, Choosing tool settings. |
03:07 min |
| View Segment |
|
12/3/2007 |
| 6505 - Router: Block Drilling |
Defining and Adding Block Drills, Block Drilling toolpaths. |
02:46 min |
| View Segment |
|
12/3/2007 |
| 6506 - Router: Engraving |
Engraving toolpaths, Roughing and Finishing |
02:31 min |
| View Segment |
|
12/3/2007 |
| 6507 - Router: 5 Axis |
Swarf toolpath, Customer tool profiles, Backplot and Solid verification, Axis limits. |
02:35 min |
| View Segment |
|
12/3/2007 |
| ws1011a - Workshop: Lathe Programming - Part 1 |
Unique aspects of Mastercam Lathe. Orienting your part file for Turning. Setup of Stock and Chuck. Programming the Part. |
33:05 min |
| View Segment |
|
3/19/2008 |
| ws1011b - Workshop: Lathe Programming - Part 2 |
Unique aspects of Mastercam Lathe. Orienting your part file for Turning. Setup of Stock and Chuck. Programming the Part. |
28:47 min |
View Segment
|
|
3/19/2008
|
| Segment |
Description |
Time/Rev Date |
| 6701 - MR2: Auto Cursor |
Auto cursor visual cues, S toggle snapping on and off. |
01:00 min |
| View Segment |
|
8/8/2007 |
| 6702 - MR2: Calculator |
Perform calculations in input fields. |
01:15 min |
| View Segment |
|
8/8/2007 |
| 6703a - MR2: Design Enhancements - Part 1 |
Deleting associative entity options |
00:38 min |
| View Segment |
|
8/8/2007 |
| 6703b - MR2: Design Enhancements - Part 2 |
Xform cancel without undoing. |
00:29 min |
| View Segment |
|
8/8/2007 |
| 6703c - MR2: Design Enhancements - Part 3 |
Xform drag - new options |
01:02 min |
| View Segment |
|
8/8/2007 |
| 6704 - MR2: Interrupt Mode |
Interupt a function to perform another |
01:03 min |
| View Segment |
|
8/8/2007 |
| 6705 - MR2: Invert Selection |
Invert selection button |
00:37 min |
| View Segment |
|
8/8/2007 |
| 6706b - MR2: Levels Manager |
New features of Levels Manager: Modless, Second Monitor, Filter |
01:37 min |
| View Segment |
|
8/20/2007 |
| 6707b - MR2: Operation Manager |
Now dockable, Resize and float, Second monitor, Font & background customization |
01:06 min |
| View Segment |
|
8/20/2007 |
| 6708 - MR2: Save Some |
Save files in different formats |
01:11 min |
| View Segment |
|
8/8/2007 |
| 6713 - MR2: Machine Definition List |
Manage list options. Customize machine definitions to display. |
00:39 min |
| View Segment |
|
8/9/2007 |
| 6709 - MR2: Mirror Toolpath |
Maintain Cutter Compensation |
01:17 min |
| View Segment |
|
8/9/2007 |
| 6716 - MR2: Facing Toolpath Start Point |
Even number passes. Control climb or conventional directions. |
03:07 min |
| View Segment |
|
8/17/2007 |
| 6715a - MR2: 2d High Speed Peel Mill Toolpath 1 |
Creating a Peel Mill Toolpath. Toolpath Driven with 2 Entities. Cut Parameters. Trochoidal Parameters. Rough Offset, Rounding Radius, Stepover. Back Feedrate. Finish Pass. Feedrate Override. |
08:26 min |
| View Segment |
|
8/15/2007 |
| 6715b - MR2: 2d High Speed Peel Mill Toolpath 2 |
Creating a Peel Mill Toolpath. Toolpath Driven with 1 Entities. Trochoidal Parameters. Single Chain Only. |
03:53 min |
| View Segment |
|
8/15/2007 |
| 6710 - MR2: Boundary Creation |
Boundaries for Surface / Solid machining. Create boundaries relative to tool size and stock to leave. |
01:18 min |
| View Segment |
|
8/9/2007 |
| 6711a - MR2: HST Enhancements - Part 1 |
Linking Enhancements. Incremental clearance controls. |
00:30 min |
| View Segment |
|
8/9/2007 |
| 6711b - MR2: HST Enhancements - Part 2 |
Feed and Speed Enhancements. HST Speed & Feed values: Surface feet per minute and Feed per Tooth. |
01:10 min |
| View Segment |
|
8/9/2007 |
| 6712 - MR2: HST Waterline Arc Moves |
HST 3D Arc move enhancements. Waterline 3D Arc move transitions. 3D Arcs supported in Helix and Ramp for: Core roughing, Area clearance, Rest roughing and Horizontal area. |
01:01 min |
| View Segment |
|
8/9/2007 |
| 6714 - MR2: Swept Surface |
Generates fewer control points. More flexibility. Use Vectors normal to another surface. |
01:42 min |
| View Segment |
|
8/9/2007 |
| 6718 - MR2: Startup Utility |
Accessing the Startup Utility. Active Products. Net Hasp Options. Custom Profile / Desktop Shortcut |
02:08 min |
| View Segment |
|
9/25/2007 |
| 6719 - MR2: Print Screen Options |
File Print. Print Preview. Centering the Print Image. Orientation, Portrait or Landscape. Margins, Scaling, Color, Name / Date, Info. Configuration Options. |
03:50 min |
| View Segment |
|
9/25/2007 |
| 6720 - MR2: Customizable Places |
Customize “Shortcut” Locations. Add and Remove Common Folders. |
01:23 min |
| View Segment |
|
9/25/2007 |
| 6721 - MR2: Surfaces from Solids Options |
Create Surfaces From Solid Models. Create from Single Face or Full Solid Body. Set Attributes. Keep or Delete Original Solid. |
02:27 min |
| View Segment |
|
9/25/2007 |
| 6722 - MR2: Create Lines / Point Dynamic |
Create Point / Line Dynamic Along Entity. Entity to create: Point, Line, or Both. Setting Distance “Along” Value. Setting Along Distance Using Geometry. Offset Distance and Side, (Left, Right, Both). |
04:53 min |
| View Segment |
|
9/25/2007 |
| 6723 - MR2: Analyze Distance Units and Precision |
Setting the Level of Precision for Analyze. Analyze Distance or Analyze Entity. Setting Defaults in System Configuration. |
01:37 min |
View Segment
|
|
9/25/2007
|