Mastercam® X

Introduction

Segment Description Time/Rev Date  
6100A-16 How to use Streamingteacher IMPORTANT: Watch this video to get the most out of your Streamingteacher training experience. 04:17 min
04/15/2013
 
4001-03 X Demo Download & Instructions NOTE: This download is the Mastercam X Demo software, but the video may reference newer versions of the software. The download instructions are the same. 05:04 min  
3105 Tooltips and Learning Mode Prompts How access tool tips and Learning mode prompts. 05:18 min
08/04/2005
 
3106 Help Menu Accessing Help. Navigating through the Help Menu. Accessing The Mastercam X Reference Guide. 02:37 min  
3109 Windows Basics File naming, rename, delete, minimize, maximize, etc. 04:55 min  
3111 CAD/CAM Coordinate System Cartesian coordinates, Point Locations within the Cartesian Coordinate System. 06:07 min  

Interface

Segment Description Time/Rev Date  
5 Hello Description of the number 5 00:00:54 min  
3201 Menus / Interface How to access the menus and use shortcut keys to perform functions: Status bar, Ribbon bar, Toolbars, Menus, Hotkeys. 02:56 min
07/06/2007
 
3203 Toolbars Toolbar configuration, new toolbars, right mouse button config, etc. 08:38 min
07/06/2007
 
3205 Hotkeys Hotkeys for quick access. 06:45 min
07/06/2007
 
3107 MRU Most Recently Used 02:53 min  
3241 Undo / Delete Undo / Redo. Unlimited or Limit. Delete / Undelete. Delete Duplicate Entities. Events not available for Undo. 05:02 min
07/06/2007
 
3207 Mouse Actions Demonstrate Mouse Functionality as it Applies to Various Areas of Mastercam. 07:55 min
07/06/2007
 
3211 System Info, View Gnomons and Status Bar Feedback Cursor Tracking, Units and Scale indicators, System Origin indicators, G-View, C-Plane, T-Plane, WCS Indicators, Hotkeys for quick access. 07:31 min  
3213 View Control Zoom/Un-Zoom, Fit to Screen, Pan vs. Spin, Dynamic Rotate, Zoom to a Target, Repaint, F9, Alt+S and Right Mouse-Click Functionality. 04:54 min  
3650d Un-Zoom Previous The "F2" Hotkey is now Un-Zoom Previous. 01:24 min
05/18/2006
 
3217 Status Bar Items showing by default. How to access. Right and Left Click Functionality. Customization. 03:42 min
08/03/2005
 
3219 Operations Manager Panel Access How to access it, hotkeys and right click functionality. 02:10 min  
3602 SP2 & MR1: Interface Changes - part 1 Change to Window Selection, Version 7 Color Layout C-Hook, Levels Manager Contrasting Rows, Mastercam Editor Enhancements. 03:42 min
12/22/2005
 
3603 SP2 & MR1: Interface Changes - part 2 Change to “About Mastercam” Info, Create Bolt Hole Circle, Isometric View / C-Plane Update, Restrict Drawing Option in Backplot. 04:42 min
12/22/2005
 
3604 SP2 & MR1: Interface Changes - part 3 Extrude Solid Reverse Direction, Hot Keys for Toolpath Geometry Selection, Solid Loops for Toolpaths. 03:44 min
12/22/2005
 
3605 SP2 & MR1: Interface Changes - part 4 Graphics Update, Create Circle Edge Point Default, Create Arc Tangent Function. 02:35 min
12/22/2005
 

Entering Coordinates

Segment Description Time/Rev Date  
3215 Auto Cursor / Auto Highlight Auto Cursor Ribbon Bar. Auto Cursor / Highlight configuration and how it works. Snapping to lines, endpoints, midpoints, angles, etc. Visual Cues. Auto Cursor Override. 11:20 min
07/06/2007
 
3209 Keyboard Data Entry Data entry shortcuts, prompt calculator, value input, inch, metric, angular and fast point. 03:40 min
07/06/2007
 
3650b Power Keys AutoCursor overrides available via single keystrokes 02:21 min
05/18/2006
 
3650a Fastpoint Setting the default to FastPoint Mode 02:11 min
07/06/2007
 

Geometry Selection Methods

Segment Description Time/Rev Date  
3221 General Selection Ribbon Bar Overview of basic selection methods. Entity "Masks" for "All" and "Only". Hotkey tips. 05:19 min
07/06/2007
 
3227a Chaining Basics What is a Chain, Full chain, Partial Chain, How to access the Chain option, Chaining intersecting Geometry and Chain Direction. 07:59 min
07/16/2008
 
3227b Chain Selection Problems Recognizing Chaining Problems: Overlapping Entities, Duplicate Entities, Improperly Trimmed Entities and Impact on Toolpaths. 08:43 min
07/06/2007
 
3223 Pre-Selection Turning Pre-Selection On/Off, Selecting entities prior to function, Selecting entities after function, Unselecting entities. 02:49 min
07/06/2007
 
3225 Masking A more detailed look at the Masking option for entity selection. "All" and "Only". Setting Preferences. "Same As" Option. "Maintain Only" Option. Saving a Mask Configuation. 05:29 min
07/06/2007
 

Advanced Interface

Segment Description Time/Rev Date  
3229 Levels Basics What are Levels, How to Change Levels for New Geometry, Accessing the Levels Manager, Naming Levels, Level Visibility On or Off, Main Level Always Visible Option. 08:15 min
07/06/2007
 
3230 More on Levels How to change Levels for Existing Geometry, Match the Level of Existing Geometry. 02:45 min  
3231 Levels Manager Using Level Sets, Saving and Importing Level Formats, Selecting Levels, Creating a Levels Report. 03:47 min
07/06/2007
 
3243 Multi-Viewports How to access viewports, changing views inside a viewport and using viewports with backplot. 03:05 min
08/03/2005
 
3303 Colors, Line Style and Width Set Attributes For Geometry to be created, Change attributes of Existing Geometry, Match Color of Existing Geometry. 04:47 min
07/06/2007
 
3305 Attributes Manager Access the Entity Attributes Manager, Setting Preferences, Apply to Existing Geometry. 07:05 min
07/06/2007
 
3307 Groups / Result Creating Groups. Group Colors vs. Entity Color. Selecting entities by Groups. Automatically Generated Groups and Results. 06:58 min
07/06/2007
 
3308 Blank / Un-Blank, Hide / Un-Hide Using the Hide / Blank Utilities to Temporarily Remove Entities from the Graphics Area. 04:31 min
07/06/2007
 
3333 2D Dimensioning 2D Dimensioning. Smart Dimension. Local and Global Settings. Adding Notes. Editing Dimensions. Hot Keys. 12:29 min
09/08/2005
 

Importing - Exporting CAD

Segment Description Time/Rev Date  
3306 File Merge / Pattern How to use the Merge / Pattern function and the different uses and options. 07:15 min
07/06/2007
 

Geometry Basics

Segment Description Time/Rev Date  
3309 2D / 3D Mode 2D / 3D modes and using Z depth, Creating geometry in 2D space and Creating geometry in 3D space. 08:06 min
07/06/2007
 
3311 Ribbon Bar Activating the ribbon bar. Unlocked, Soft-lock and Hard-lock. Navigating through the ribbon bar, tool tips, learning mode, closing the ribbon bar. 04:58 min  
3313 Live, Fixed and Phantom Entities Properties of entities when they exist as a: Phantom Entity, Live Entity, Fixed Entity. 01:49 min  
3318 Relative Positioning Create Entities Relative to the position of another. Define location by X-Y coordinates, Polar Coordinates, and Distance along and entity. 03:11 min
07/06/2007
 

Points, Lines and Rectangles

Segment Description Time/Rev Date  
3321 Point Function Create: Point Position, Point Dynamic, Node Points, Point Segments, Point Endpoint, Point Small Arcs. 06:54 min
07/06/2007
 
3315 Line Function How to access create line endpoint, input x and y coordinates for endpoints, create line with polar information, multi-line creation, create vertical and horizontal lines, create tangent lines. 06:51 min
07/06/2007
 
3316 More Create Line Function Create line closest, line bisect, line perpendicular, line parallel, line parallel and tangent. 3:53 min
07/06/2007
 
3323 Rectangle / Rectangular Shapes Sketching a rectangle, defining by 2 points, defining by width and height, rectangle including a surface, rectangular shapes, "D" shape, double "D", ob-round, choosing an anchor point, filleted corners, center point and rotate the orientation. 05:05 min
06/16/2006
 

Create Arcs

Segment Description Time/Rev Date  
3317 Arc Tool Basic Arc Tool Options. Create Circle Centerpoint. Ribbon Bar Fields / Hotkeys. Edit a Live Entity, Create Circle Centerpoint and Tangent. 03:23 min
07/06/2007
 
3317b Arc Polar Defining an Arc By Start and End Angles. Defining and Editing an Arc Center Point. Using the "Flip" option. Using The Tangent option. 05:18 min
07/06/2007
 
3317c Create Circle Edge Point Defining a Circle by 2 or 3 Points. Creating a Circle Tangent to 2 Entities, and to 3 Entities. 03:21 min
07/06/2007
 
3317d Create Arc Endpoint Create Arcs Defined by Endpoints. Tangency Option for Create Arc Endpoint. 02:18 min
07/06/2007
 
3317e Create Arc 3 Points Create Arcs as Defined By 3 Points. Create Arcs Tangent to 3 Entities. 02:03 min
07/06/2007
 
3317f Create Arc Polar Endpoints Create Arcs Defined By End Point Positions. 02:58 min
07/06/2007
 
3317g Create Arc Tangent Create Arc Tangent "Options" within the various Arc Functions, Plus Overview of the "Create Arc Tangent Function". 10:31 min
10/31/2005
 
3322 Create Bolt Hole Circles Accessing the Create Bolt Circles function. Setting the Radius, Start Angle, Angle Between and Number of Holes. Using the Create Holes option and setting the diameter. 01:25 min
07/06/2007
 

Fillets, Chamfers and Splines

Segment Description Time/Rev Date  
3319 Fillet Tool Enter radius values, fillet styles, trim options, filleting chains vs. entities, chain / fillet direction options. 05:24 min  
3320 Chamfer Tool Enter Distance Values, 1 Distance, 2 Distances, 1 Distance + Angle, Width, Trim Options, Chamfer Chains vs Entities. 03:35 min  
3325 Spline Tool Create Spline Manual, Create Spline Automatic, Create Curves Spline, Create Blend Spline, Edit End Conditions. 05:42 min  
3326 Converting Splines to Arcs Convert Circular Shaped Splines to Arcs. Using the Simplify Function. Convert Splines to Arc Segments. Using Break Many Pieces. Converting a Chain of Arcs to a Single Spline. Using the Create Curves Spline Function. 06:31 min
10/11/2005
 
3650l Modify Spline function Modify the node points of parametric splines 01:31 min
09/09/2008
 

Trim / Break Polygons and Bounding Box

Segment Description Time/Rev Date  
3323b Create Bounding Box 2D / 3D Create: Stock, Lines / Arcs, Points, Solids, Expand Options, Rectangular / Cylindrical, All Entities / Select Entities, Center on Axis. 03:22 min
07/06/2007
 
3324 Create Polygon / Ellipse Sketching a Polygon, Defining the “Base Point”, Defining Number of Sides, Radius across flats or corners, Filleting the corners, Defining the Base Point of an Ellipse, Entering values for Radius “A” and “B”, Create a partial ellipse, Angle of orientation, 04:21 min
07/06/2007
 
3327 Trimming Tool Trim 1, 2 and 3 entities, divide, trim to a point, extend / shorten length and trimming arcs. 07:53 min
07/06/2007
 
3329 Break Functions Break 1, 2, and 3 entities. Break Divide. Break at a Point. Break at a Distance. Break Extend. 07:21 min
07/06/2007
 

Sketcher Projects

Segment Description Time/Rev Date  
3501 2D Sketcher Project 1 Create Rectangle, Create Line Polar, Tangent, Access Fast Point, Create Arc Polar, Create Line Horizontal, Create Fillets, Trim, Partial Chain, Select entities with window “Inside +”, X-form Mirror. 11:19 min
07/06/2007
 
3502 2D Sketcher Project 2 Create Circles Center Point, Create Arcs Polar, Access the “Relative” Position Option, Create Arc Polar, Create Circles Tangent to 2 Entities, Trim 3 entity option, Create Fillets. 09:44 min
07/06/2007
 
3503 2D Sketcher Project 3 Create Lines Polar, Create Arcs Polar Start/End Angle, Fast Point Access, Create Fillets with preview and trim, Select entities to Rotate, X-form Rotate, Trim 2 entities, Create Arcs Tangent to 3 entities, Create Circle at the Center of an Arc. 10:26 min
07/06/2007
 
3504 2D Sketcher Project 4 Create Circles Center Point, Create Arcs Polar, Access the “Relative” Position Option, Create Arc Polar, Create Circles Tangent to 2 Entities, Trim 3 entity option, Create Fillets. 10:01 min
07/06/2007
 
3505 2D Sketcher Project 5 - Part 1 Create Line Polar. Create Line Horizontal. Create Line Vertical. Create Circle Center Point. Access "Relative" Location Option. Smart Dimension. 07:30 min
07/06/2007
 
3506 2D Sketcher Project 5 - Part 2 Create Line Tangent at an Angle. Create Line Parallel. X-Form Mirror. Create Arc Polar. Trim 3 Entities. Create Arc Tangent to 3 Entities. Create Circle Edge Point. Create Fillets. 07:05 min
07/06/2007
 
3506b 2D Sketcher Project 6 Create Circle Center Point. Create Arc Polar. Create Line Horizontal, Vertical, Polar, Parallel. Create Arc Polar Tangent. Create Arc 3 Points Tangent. Create Circle Edge Points Tangent. Fillet, Trim, and Delete Tools. 08:12 min
07/06/2007
 

Views, Planes and WCS

Segment Description Time/Rev Date  
3235 Construction Plane Creating Geometry using Standard Construction Planes. Changing Construction Planes. Changing C Planes and Z Depths in 2D and 3D Modes. 08:48min  
3237 Graphics View Accessing Graphics Views. Hot Keys. Status bar Access. Right Mouse Button. 03:53 min  
3239 Named Views, WCS WCS, Named Views, For Graphics Viewing and for Geometry Construction. 12:18 min
07/06/2007
 
3240 Changing The WCS Create a Named View and Set the System WCS to recognize it as "Top". 06:50 min
07/06/2007
 

XForm / Transform Functions

Segment Description Time/Rev Date  
3335a Translate X-Form Translate function, Geometry Selection, Move, Copy, or Join, Number of copies, Distance and Direction, Between Points, Polar Coordinates, Preview Option, Fit to screen. 05:28 min  
3335b Translate Project Function Project Geometry on to a Plane or Surface. 04:13 min  
3337 Mirror X-Form Mirror functions, Geometry Selection, X-Form Mirror Dialog Box, Inputting Values for Distance and Direction, Selecting Geometry for Distance and Direction. 03:10 min  
3339 X-Form Rotate X-Form Rotate functions, Geometry Selection, X-Form Rotate Dialog Box, Number of Copies, Selecting the Point of Rotation, Angular Value of the Rotation Interval, Rotate vs. Translate Options, Direction of Rotation, Remove / Restore Copies. 03:52 min  
3340a X-Form Translate 3D Standard Translate between standard views, Geometry Selection, X-Form Translate 3D Dialog Box, Source View, Source reference point, Destination View, Destination reference point. 01:27 min  
3340b X-Form Translate 3D Auxiliary View Translate between Auxiliary views, Geometry Selection, X-Form Translate 3D Dialog Box, Accessing the View Mgr, Creating a New View, Source View, Source reference point, Destination View, Destination reference point. 02:13 min  
3507 X-Form Translate Project X-Form Translate Application, Geometry Selection, Move, Copy, or Join, Distance and Direction, Use New Attributes, Clear Colors, Apply vs. OK. 04:06 min  

Beginning Solids / Primitives

Segment Description Time/Rev Date  
3348 Intro to Solids Accessing the solids manager, association between wireframe and solids, organizing entities. Using Extrude to create a body, cut a body and editing parameters. 13:06 min
10/11/2005
 
3348a 3D Primitives Basics Primitive Types. Surface / Solids Option. Creating a Cylinder Primitive. Selecting a Base Point. Radius, Height, Sweep. Orient about an Axis, 2 Points, or a Line. Edit Attribute Control Fields. 07:19 min
10/18/2005
 
3348b Creating Primitive Shapes More Primitive Types, Solids/Surfaces Option. Block, Cone, Sphere and Torus Shapes. Selecting a Base Point, Entering and Editing Attribute Fields. 09:35 min
10/21/2005
 
3348c Solid Primitives Project Solid Project Using Only Primitive Solid Shapes. 13:06 min
11/03/2005
 
3348d Surface/Solids Shading Covers shortcut key access (alt-s), changing colors of shaded models, Mouse Dynamic mode, translucent models, ambient light, chordal height settings, Radial Display Curve Angle. 07:34 min
12/06/2005
 

Solid Modeling

Segment Description Time/Rev Date  
3348e Solid Extrude Function - part 1 Chaining Direction vs. Extrude Direction. Editing and Regenerating Solids. Distance and Draft Options. Direction Options. 02:03 min
11/28/2005
 
3348f Solid Extrude Function - part 2 Re-Select Function. Re-Select Ribbon Bar Options. Vector, Translucent Shading, and Shortcut Keys. 03:28 min
11/28/2005
 
3348g Solid Extrude Thin Wall Option Extrude Boss and Cut Using The Thin Wall Option. Thicken amount and direction options. Combine Operations. 06:39 min
12/13/2005
 
3348h Solid Revolve Create Solids Using the Revolve Function. 04:18 min
12/13/2005
 
3348i Solid Revolve Cut Cut Solids Using the Revolve Function 02:20 min
12/13/2005
 
3348j Solid Sweep Solid Sweep. Geometry required for the operation. 03:31 min
01/09/2006
 
3347j Solid Sweep - Part 2 Using The Solid Sweep Function to Model Threads, Creating a Dimensionally Correct Thread, Create Solid Body, Create Helix, Solid Sweep Cut, Potential Errors When Using Solid Sweep 07:09 min
09/30/2008
 
3348k Solid Draft Faces Draft Solid Faces. Face, Plane, Edge, or Extrude Selection. Draft Angle. Draft Direction. Reference Face / “Hinge Point” Relation. Edit Solid Operations / Regenerate. Propagate Along Tangency. 06:47 min
01/09/2006
 
3348L Solid Shell Function Review of Revolve and Extrude add Boss, Sweep, Fillet and Extrude cut. Accessing the Shell feature. Direction and thickness. Order of operations. 07:38 min
02/13/2008
 
3608 Silhouette Boundary Overview of the Silhouette Boundary C-Hook. 02:16 min
12/22/2005
 

Introduction to Toolpaths

Segment Description Time/Rev Date  
3512a Ten Step Project 1 - part 1 Basic 10 Step Approach to Programming in Mastercam X, Part 1. 12:56 min
07/06/2007
 
3512b Ten Step Project 1 - part 2 Basic 10 Step Approach to Programming in Mastercam X, Part 2 11:55 min
07/06/2007
 
3401 Operations Manager Overview Toolpath Manager. Object definition (icons). Properties. Editing and Regenerating Operations. Re-Number Tools. Edit Common Parameters. 12:23 min
07/06/2007
 
3650g Toolpath Manager Display Settings Only display selected toolpaths, Only display associated geometry, or Both. 03:13 min
07/06/2007
 
6222 Machine Control Definitions Overview of the Machine Control Definitions 06:42 min
07/06/2007
 
3407 Common Toolpath Parameters - Part 1 Tool display Window, Access the tool library, Tool Selection and Filter, Tool Definition / Parameters, Accessing the Tool Manager, Accessing the Speed / Feed Calculator, General description of options available, Force Tool Change Option. 06:39 min
07/06/2007
 
3408 Common Toolpath Parameters - Part 2 Contour Parameters Page, General description of options available, Tool Height definitions, Cutter Comp Options, Tip Comp, Roll Cutter around Corners, Infinite look ahead, Leave Stock. 06:47 min
07/06/2007
 
3408d Cutter Compensation Using Cutter Comp in Mastercam, Cutter Compensation in Computer, Cutter Compensation in Control, Cutter Compensation Wear, Cutter Compensation Reverse Wear, Cutter Compensation Off, Lead In / Out, Cutter Comp with Pocket Operations 11:08 min
07/06/2007
 
3408a Absolute vs. Incremental Depths Setting the final Cutting Depth from either Z "0" or setting the final depth to the "Distance in Z from the Geometry" 07:26 min
07/06/2007
 

Toolpath Management

Segment Description Time/Rev Date  
3408b Backplot Options Access Backplot. Select Operations. Toolpath Display. Backplot Options. The Player Bar. Information Display. 06:05 min
07/06/2007
 
3650f Backplot Tool Display Opacity settings added to Backplot settings dialog boxes. 02:04 min
07/06/2007
 
3408c Verify Access Verify. Select Operations. Tool Display Options. Verify Options. Machining Controls. Verbose Mode. Measure Option. Translucent Stock. Color Options. 09:00 min
07/06/2007
 
3650m STL Compare Reset Tolerance and Stock to Leave. 03:45 min
07/06/2007
 
3650h User Defined Speeds / Feeds Manually set feeds and speeds. Feed, Plunge & Retract rate; Spindle speeds. 04:15 min
07/06/2007
 
3607 Toolpath Editor Overview of the new Toolpath Editor, Step to a Tool Position to be Edited, Select the Tool Position to be Edited. Delete a “Section” from a toolpath, Edit at a Point of a toolpath, Change Z height and Feed Rate. 03:48 min
07/06/2007
 
3650e Name NC Files Setting the default names for Machine Groups, Toolpath Groups, and the NC File Name. 01:49 min
07/06/2007
 

Facing Toolpaths

Segment Description Time/Rev Date  
3409 Facing Function Create a Facing Toolpath w/Wire Geometry, Create toolpath w/ Stock setup definition, Access Tool Library, C-Plane Chaining, Cutting Methods, Options within the Facing Parameters Page. 12:24 min
07/06/2007
 
3514 Facing Project 1 Create a Facing Toolpath w/Wire Geometry, Create Toolpath w/Stock Setup Definition, Access Tool Library, C-Plane Chaining, Cutting Methods and Options Within the Facing Parameters Page. 12:42 min  

Pocket Toolpaths

Segment Description Time/Rev Date  
3411a Pocket Basics Pocket basics, Geometry selection, Pocket final depth, Depth Cuts, Cutting Method, Machine Finish Pass Final / All Depths. 06:35 min
07/06/2007
 
3411b Pocket Incremental Depths Pocket Incr. Depths, Geometry selection, Analyze Entity, C-plane Chaining, Edit a Cutting Tool, Incremental vs Absolute Depths. 05:13 min
07/06/2007
 
3411C Pocket Finish Passes Pocket Finish Passes, Depth Cuts By Pocket, Depth Cuts By Depth, Machine Finish Pass only at Final Depth, Machine Finish Pass after Roughing all Pockets. 04:08 min
07/06/2007
 
3411D Pocket Basic Entry Parameters Basic Entry Parameters, Ramp Entry, Helix Entry, Follow Boundary. 06:46 min  
3411E Pocket Plunge Entry in a Hole Pocket Plunge Entry in a Hole, Chain Geometry for Pocketing, Including Points with the pocket chains. 03:02 min
07/06/2007
 
3411F Pocket Additional Finish Operation Pocket Additional Finish Operation, Chain Geometry for Pocketing, Including Points with the pocket chains, Create a Pocket Toolpath, Creating a separate finish operation, Lead In / Out Parameters, Access Verify Configure Page, Use Cylinder shaped stock, C 04:36 min
07/06/2007
 
3411G Pocket Face Toolpath Pocket Face toolpath, Geometry required for Pocket Facing, Setting toolpath Depth, Entrance / Exit Parameters, Overlap Percentage, Finish outer Boundary, Inside Out / Outside In. 10:55 min
07/06/2007
 
3411H Pocket Island Face Toolpath Pocket Island Face toolpath, Geometry required for Pocket Island Facing, Approach / Exit Distance, Overlap Percentage, Stock Above Island, Depth Cuts. 04:17 min
07/06/2007
 
3411I Pocket Re-Machining Pocket Re-Machining, Generating a Pocket Re-Machine Toolpath, Copying an existing toolpath, Setting Re-Machine Parameters, Clearance Values, How the toolpath is computed, Cut where needed vs. complete finish pass. 06:46 min
07/06/2007
 
3411J Open Pocket Pocket type, Partial chain selection, Roughing and Finishing, Open pocket cutting method, Lead in / Lead out. 10:26 min  

Contour Toolpaths

Segment Description Time/Rev Date  
3413a 2D Contour Function Select default machine type, Load 2D Toolpath Toolbar, Define Stock, Creating a Contour Toolpath, Chaining Geometry, Access Tool Library / tool selection, Setting Contour Parameter Values, Cutter Comp Selection, Break Thru, Basic Lead in / out, Back Plot. 12:23 min
07/06/2007
 
3413b 2D Contour - Lead In / Out Overview of Lead In / Out options, Line / Arc options, Start at Midpoint, Overlap, Adjust Start / End of Contour, Enter / Exit on 1st / Last depth cut only, Override feed rate, Use Entry / Exit Point. 05:28 min
07/06/2007
 
3413c 2D Contour - Depthcuts / Multipass Overview of Depthcuts / Multipass options, Maximum Rough Step, Number of Finish Cuts, Finish Step, By Contour / By Depth, Rough Pass Number / Spacing, Finish Pass Number / Spacing, Machine Finish Pass Final / All Depths. 11:35 min
07/06/2007
 
3413d 2D Contour - 2D Chamfer Chain Selection / Direction, Tool Selection, Tool Library Filter, Depth Value, Accessing 2D Chamfer Contour Type, Setting Chamfer Width / Tip Offset, Verify Round Stock Display. 05:25 min
07/06/2007
 
3413e 2D Contour - Chamfer Supplement Chamfer Supplement, Toolpath Models Designed with Chamfers, Profile Chain Selection, Depth Value Selection. 03:41 min
07/06/2007
 
3518 Contour Project 2D Creating a Contour toolpath, Chaining Geometry, Lead In/Out, Multi-Pass, Shorten/Extend Contours, Break Function, Leave Stock. 04:34 min
07/06/2007
 

Drill Toolpaths

Segment Description Time/Rev Date  
3417a Drill Function - Drill Parameters Basic Drill Parameters, Entity Selection Methods, Selecting Arc Centers, Using the “Entities” select option, Drill Cycle Types, Tip Compensation. 05:50 min
07/06/2007
 
3417b Drill Function - Entity Selection Methods 1 Basic Drill Parameters, Entity Selection Methods, Mask on Arc, Sorting Option. 02:37 min
07/06/2007
 
3417c Drill Function - Entity Selection Methods 2 Basic Drill Parameters, Entity Selection Methods, Automatic Point Selection, Review of Drill Toolpath Basics. 02:18 min
07/06/2007
 

Circle Toolpaths

Segment Description Time/Rev Date  
3419 Circmill Circmill Basics, Circmill Parameters, Roughing Parameters, Entity Selection Methods, Points vs. Circles, Changing Arc Sweep values for cutter comp. 05:32 min  
3421 Threadmill Threadmill toolpath, Generating a Threadmill Toolpath, Tool Geometry on a Custom Level, Selecting Geometry, Threadmill Parameters, Using an STL file for Verify Stock, Select and Copy Toolpaths, Number of Active Teeth. 12:43 min  
3606 Multi-Pass Threadmilling Demonstrates the new Multi-Pass feature within the Threadmill Toolpath. 01:48 min  
3425 Slot Mill Slot Mill Basics, Slot mill Parameters, Ramp Parameters, Entity Selection Methods, Geometry Requirements, Changing Arc Sweep values for cutter comp. 04:41 min  

Transform Toolpaths

Segment Description Time/Rev Date  
3432 Transform Toolpaths Exploring the Transform toolpaths option. 07:44 min  

Importing / Exporting Toolpaths

Segment Description Time/Rev Date  
3425b Export Operations Export Operations with Geometry, Select a Directory, Name the Operation File. 02:08 min
07/06/2007
 
3425c Import Operations Importing Operations with Geometry, Sort Operations by Tool Number. 03:45 min
07/06/2007
 

Toolpath Combination Projects

Segment Description Time/Rev Date  
3516 Toolpath Combo Project 1 Creating a new View / Work “0”. Define Stock. Toolpaths Created: Face, Contour Standard and Ramp, Pocket Circle Mill, Drill, Spot-Drill, and Tap. Copy a Toolpath and Re-Chain Geometry. Verify Toolpaths. 13:26 min
07/06/2007
 
3426 2 Vise Set-up Project - Part 1 Creating Named Views. Assigning New Origins to Work Offsets. Relationship Between Toolpaths and Views. Changing Views. Creating a Facing Toolpath. Tool Library Filter. Calculating Feeds and Speeds. Creating Contour Toolpaths. Depth Cuts and Multi-pass. Cu 10:15 min
07/06/2007
 
3427 2 Vise Set-up Project - Part 2 Switching Between Views. Creating Drill Toolpaths. Setting Depths using Drill Calculator. Copying a Toolpath. Creating a Pocket Toolpath. Tool Entry in a Drilled Hole. Circle Toolpath. 08:06 min
07/06/2007
 
3428 2 Vise Set-up Project - Part 3 Review of the Process. Using an STL File in Verify. Edit Common Parameters. "Force Tool Change." Posting the Code. Reviewing the Code in the Program Editor. Why Use Multiple Work Offsets. 05:41 min
07/06/2007
 

Configuration

Segment Description Time/Rev Date  
3650i Chaining Default Options, and Level Descriptor New Options for setting User Defaults for Chaining. Display Level Descriptor on the screen 01:28 min
06/05/2006
 
6225 Setting Up Autosave Accessing Autosave through Settings / Configuration and Pefered parameter settings. 05:36 min
01/08/2007
 
3650j MCX Backup Files Save backup files in a user-specified backup directory. 02:53 min
05/23/2006
 
3650n Browse for External Communications Mastercam allows you to browse for an external communications package. 0:41 min
05/23/2006
 

3D HST (High Speed Toolpaths)

Segment Description Time/Rev Date  
3632 Introduction to HST Machining Introduction to the new High Speed Toolpaths 01:53 min
01/03/2006
 
3633 Overview of HST Machining How to Create High Speed Toolpaths. Selecting Solids for Machining. New Interface. Basic Parameters. Quick View Settings Window. Copy a Toolpath. Change Toolpath Type and Style. Loop Transitions between Passes. 07:09 min
01/03/2006
 
3634 Core Roughing This new roughing motion ensures climb cutting almost all the time and plunges off of the part to the next depth whenever possible. Additional cuts can be added based on a maximum profile stepover set by the user. Features covered: Setting Cut Parameters. 04:08 min
01/04/2006
 
3650p HST Rest Roughing Rest Roughing toolpath has been added to the HST toolpaths. You can now select a previous operation, all. previous operations, a CAD file (including STL), or a roughing tool. 01:53 min
05/18/2006
 
3635 Area Clearance Better suited for roughing cavities and has similar entry/exit intelligence to Core roughing. 02:44 min
01/04/2006
 
3642 Raster Similar to the current finish parallel toolpath, now with improved entry/exit motion. Applying the Raster Finish Toolpath. Steep / Shallow Angle Parameters. Linking Parameters. Step-over Values. Cut Parameters / Machining Angle. Using a Containment Boundary. Adding a Pencil Finishing Toolpath. Evaluating the Results of the Toolpath. 08:46 min
02/28/2006
 
3641 Scallop Similar to the existing scallop toolpath, but with better transition motion. Applying the Scallop Finish Toolpath. Stepover / Scallop Height Up Milling / Down Milling / Zig Zag. Steep / Shallow Angle Parameters. Approximate Starting Point. Save Verify Results as an STL File. Using Scallop Rest Passes. Evaluating the Results of the Toolpath. 08:09 min
02/22/2006
 
3638 Horizontal Finish Automatically calculates and machines only the flat surfaces. The user also has control over the range of depths to be machined. 05:26 min
01/25/2006
 
3639 Waterline This is a “constant Z” toolpath with smooth intelligent motion. Fewer retract moves keeps the cutter in contact with the part more often. 07:12 min
01/25/2006
 
3640 Pencil Cutting Machines just the “creases” of the part or the entire part with a unique and natural cutting motion. Applying the Pencil Finish Toolpath. Limit Number of Offsets. Steep / Shallow Angle Parameters. Analyze Dynamic. Step-over Parameter. Overthickness Parameter. 07:25 min
02/08/2006
 
3636 Restmill Setting Using the Restmill Option in a Roughing Op. Save Verify Results as an STL File. Use an STL File as Stock for Verify. Enter a ? for “Data Entry” Shortcut Keys. Limiting “Z” Depths. 06:13 min
01/25/2006
 
3637 Adaptive Stepdown Applying the Adaptive Stepdown Method. Which Toolpaths are Constant Z Cutting. Accessing the Add-Cuts Option. Min. Stepdown vs. Max. Profile Values. 04:59 min
01/25/2006
 
3643 Arc Filter Accessing Filter Parameters. Filter Ratio. Filter Tolerance. Cut Tolerance. Total Tolerance. Arc Planes G17, G18, G19. How Filtering Effects NC Code Size. How Filtering Effects Cut Accuracy. 09:04 min
04/07/2006
 
3608 Silhouette Boundary Overview of the Silhouette Boundary C-Hook. 02:16 min
12/22/2005
 
3650q HST Stock to Leave on Floors and Walls Now you can set different values for stock to leave on vertical and horizontal areas for all of the HST toolpaths 01:13 min
05/18/2006
 

HST / High Speed Toolpath Combo Projects

Segment Description Time/Rev Date  
3644 HST Combo Project Part 1 Create New View / Origin. Stock Setup. HST Core Rough. Arc Filtering. Backplot Settings. HST Restmill. Verify with STL Stock Model. 09:11 min
04/11/2006
 
3645 HST Combo Project Part 2 HST Horizontal Finish. Modify Parameters. HST Waterline Finish. HST Scallop Finish. Save Verify Results as an STL Model. 07:19 min
04/11/2006
 
3646 HST Combo Project Part 3 HST Pencil Finish. Modify Parameters. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code.” 05:27 min
04/11/2006
 
3647a HST Project 2 Roughing Part 1 Create New View / Origin. Stock Setup. Face Toolpath. HST Area Clearance. Selecting a Containment Boundary. Backplot and Verify Toolpaths. Save Verify Results as an STL File. 07:07 min
05/31/2006
 
3647b HST Project 2 Roughing Part 2 Rough Rest Passes Option. Create Rest Passes using progressively smaller diameter tools to further rough out the model. Save Verify Results as an STL File. Verify using STL Stock Model 07:12 min
05/31/2006
 
3648a HST Project 2 Finishing Part 1 Create New Toolpath Group. Horizontal Area Finishing Toolpath. Waterline Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. 08:01 min
05/31/2006
 
3648b HST Project 2 Finishing Part 2 Pencil Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code” 04:24 min
05/31/2006
 
3648c HST Project 2 Finishing Part 3 Pencil Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code” 03:45 min
05/31/2006
 

Service Pack 1 Updates (SP1)

Segment Description Time/Rev Date  
3601 SP1: Service Pack 1 Changes Large Font Support. New Options in the Toolpath Manager Display. New Solid Import Options. New Help Menu Index. New Program Number Options. Version Checker. 06:25 min
12/02/2005
 

Service Pack 2 Updates (SP2)

Segment Description Time/Rev Date  
3602 SP2 & MR1: Interface Changes - part 1 Change to Window Selection, Version 7 Color Layout C-Hook, Levels Manager Contrasting Rows, Mastercam Editor Enhancements. 03:42 min
12/22/2005
 
3603 SP2 & MR1: Interface Changes - part 2 Change to “About Mastercam” Info, Create Bolt Hole Circle, Isometric View / C-Plane Update, Restrict Drawing Option in Backplot. 04:42 min
12/22/2005
 
3604 SP2 & MR1: Interface Changes - part 3 Extrude Solid Reverse Direction, Hot Keys for Toolpath Geometry Selection, Solid Loops for Toolpaths. 03:44 min
12/22/2005
 
3605 SP2 & MR1: Interface Changes - part 4 Graphics Update, Create Circle Edge Point Default, Create Arc Tangent Function. 02:35 min
12/22/2005
 
3607 Toolpath Editor Overview of the new Toolpath Editor, Step to a Tool Position to be Edited, Select the Tool Position to be Edited. Delete a “Section” from a toolpath, Edit at a Point of a toolpath, Change Z height and Feed Rate. 03:48 min
07/06/2007
 
3608 Silhouette Boundary Overview of the Silhouette Boundary C-Hook. 02:16 min
12/22/2005
 

Maintenance Release 1 Updates (MR1)

Segment Description Time/Rev Date  
3632 Introduction to HST Machining Introduction to the new High Speed Toolpaths 01:53 min
01/03/2006
 
3633 Overview of HST Machining How to Create High Speed Toolpaths. Selecting Solids for Machining. New Interface. Basic Parameters. Quick View Settings Window. Copy a Toolpath. Change Toolpath Type and Style. Loop Transitions between Passes. 07:09 min
01/03/2006
 
3634 Core Roughing This new roughing motion ensures climb cutting almost all the time and plunges off of the part to the next depth whenever possible. Additional cuts can be added based on a maximum profile stepover set by the user. Features covered: Setting Cut Parameters. 04:08 min
01/04/2006
 
3635 Area Clearance Better suited for roughing cavities and has similar entry/exit intelligence to Core roughing. 02:44 min
01/04/2006
 
3636 Restmill Setting Using the Restmill Option in a Roughing Op. Save Verify Results as an STL File. Use an STL File as Stock for Verify. Enter a ? for “Data Entry” Shortcut Keys. Limiting “Z” Depths. 06:13 min
01/25/2006
 
3637 Adaptive Stepdown Applying the Adaptive Stepdown Method. Which Toolpaths are Constant Z Cutting. Accessing the Add-Cuts Option. Min. Stepdown vs. Max. Profile Values. 04:59 min
01/25/2006
 
3638 Horizontal Finish Automatically calculates and machines only the flat surfaces. The user also has control over the range of depths to be machined. 05:26 min
01/25/2006
 
3639 Waterline This is a “constant Z” toolpath with smooth intelligent motion. Fewer retract moves keeps the cutter in contact with the part more often. 07:12 min
01/25/2006
 
3640 Pencil Cutting Machines just the “creases” of the part or the entire part with a unique and natural cutting motion. Applying the Pencil Finish Toolpath. Limit Number of Offsets. Steep / Shallow Angle Parameters. Analyze Dynamic. Step-over Parameter. Overthickness Parameter. 07:25 min
02/08/2006
 
3641 Scallop Similar to the existing scallop toolpath, but with better transition motion. Applying the Scallop Finish Toolpath. Stepover / Scallop Height Up Milling / Down Milling / Zig Zag. Steep / Shallow Angle Parameters. Approximate Starting Point. Save Verify Results as an STL File. Using Scallop Rest Passes. Evaluating the Results of the Toolpath. 08:09 min
02/22/2006
 
3642 Raster Similar to the current finish parallel toolpath, now with improved entry/exit motion. Applying the Raster Finish Toolpath. Steep / Shallow Angle Parameters. Linking Parameters. Step-over Values. Cut Parameters / Machining Angle. Using a Containment Boundary. Adding a Pencil Finishing Toolpath. Evaluating the Results of the Toolpath. 08:46 min
02/28/2006
 
3643 Arc Filter Accessing Filter Parameters. Filter Ratio. Filter Tolerance. Cut Tolerance. Total Tolerance. Arc Planes G17, G18, G19. How Filtering Effects NC Code Size. How Filtering Effects Cut Accuracy. 09:04 min
04/07/2006
 
3644 HST Combo Project Part 1 Create New View / Origin. Stock Setup. HST Core Rough. Arc Filtering. Backplot Settings. HST Restmill. Verify with STL Stock Model. 09:11 min
04/11/2006
 
3645 HST Combo Project Part 2 HST Horizontal Finish. Modify Parameters. HST Waterline Finish. HST Scallop Finish. Save Verify Results as an STL Model. 07:19 min
04/11/2006
 
3646 HST Combo Project Part 3 HST Pencil Finish. Modify Parameters. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code.” 05:27 min
04/11/2006
 
3647a HST Project 2 Roughing Part 1 Create New View / Origin. Stock Setup. Face Toolpath. HST Area Clearance. Selecting a Containment Boundary. Backplot and Verify Toolpaths. Save Verify Results as an STL File. 07:07 min
05/31/2006
 
3647b HST Project 2 Roughing Part 2 Rough Rest Passes Option. Create Rest Passes using progressively smaller diameter tools to further rough out the model. Save Verify Results as an STL File. Verify using STL Stock Model 07:12 min
05/31/2006
 
3648a HST Project 2 Finishing Part 1 Create New Toolpath Group. Horizontal Area Finishing Toolpath. Waterline Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. 08:01 min
05/31/2006
 
3648b HST Project 2 Finishing Part 2 Pencil Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code” 04:24 min
05/31/2006
 
3648c HST Project 2 Finishing Part 3 Pencil Finishing Toolpath. Save Verify Results as an STL File. Verify using STL Stock Model. Verify With STL Compare: Save an STL File of Design Model. Compare Verify Results to STL File. Interpret STL Compare “Color Code” 03:45 min
05/31/2006
 

Maintenance Release 2 Updates (MR2)

Segment Description Time/Rev Date  
3650a Fastpoint Setting the default to FastPoint Mode 02:11 min
07/06/2007
 
3650b Power Keys AutoCursor overrides available via single keystrokes 02:21 min
05/18/2006
 
3650c MR2: AutoCursor Lock / Overrides AutoCursor locked mode for multiple events. Locked mode limitations 01:41 min
07/06/2007
 
3650d Un-Zoom Previous The "F2" Hotkey is now Un-Zoom Previous. 01:24 min
05/18/2006
 
3650e Name NC Files Setting the default names for Machine Groups, Toolpath Groups, and the NC File Name. 01:49 min
07/06/2007
 
3650f Backplot Tool Display Opacity settings added to Backplot settings dialog boxes. 02:04 min
07/06/2007
 
3650g Toolpath Manager Display Settings Only display selected toolpaths, Only display associated geometry, or Both. 03:13 min
07/06/2007
 
3650h User Defined Speeds / Feeds Manually set feeds and speeds. Feed, Plunge & Retract rate; Spindle speeds. 04:15 min
07/06/2007
 
3650i Chaining Default Options, and Level Descriptor New Options for setting User Defaults for Chaining. Display Level Descriptor on the screen 01:28 min
06/05/2006
 
3650j MCX Backup Files Save backup files in a user-specified backup directory. 02:53 min
05/23/2006
 
3650l Modify Spline function Modify the node points of parametric splines 01:31 min
09/09/2008
 
3650m STL Compare Reset Tolerance and Stock to Leave. 03:45 min
07/06/2007
 
3650n Browse for External Communications Mastercam allows you to browse for an external communications package. 0:41 min
05/23/2006
 
3650p HST Rest Roughing Rest Roughing toolpath has been added to the HST toolpaths. You can now select a previous operation, all. previous operations, a CAD file (including STL), or a roughing tool. 01:53 min
05/18/2006
 
3650q HST Stock to Leave on Floors and Walls Now you can set different values for stock to leave on vertical and horizontal areas for all of the HST toolpaths 01:13 min
05/18/2006
 

Fast Track

Segment Description Time/Rev Date  
3501 2D Sketcher Project 1 Create Rectangle, Create Line Polar, Tangent, Access Fast Point, Create Arc Polar, Create Line Horizontal, Create Fillets, Trim, Partial Chain, Select entities with window “Inside +”, X-form Mirror. 11:19 min
07/06/2007
 
3502 2D Sketcher Project 2 Create Circles Center Point, Create Arcs Polar, Access the “Relative” Position Option, Create Arc Polar, Create Circles Tangent to 2 Entities, Trim 3 entity option, Create Fillets. 09:44 min
07/06/2007
 
3503 2D Sketcher Project 3 Create Lines Polar, Create Arcs Polar Start/End Angle, Fast Point Access, Create Fillets with preview and trim, Select entities to Rotate, X-form Rotate, Trim 2 entities, Create Arcs Tangent to 3 entities, Create Circle at the Center of an Arc. 10:26 min
07/06/2007
 
3504 2D Sketcher Project 4 Create Circles Center Point, Create Arcs Polar, Access the “Relative” Position Option, Create Arc Polar, Create Circles Tangent to 2 Entities, Trim 3 entity option, Create Fillets. 10:01 min
07/06/2007
 
3505 2D Sketcher Project 5 - Part 1 Create Line Polar. Create Line Horizontal. Create Line Vertical. Create Circle Center Point. Access "Relative" Location Option. Smart Dimension. 07:30 min
07/06/2007
 
3506 2D Sketcher Project 5 - Part 2 Create Line Tangent at an Angle. Create Line Parallel. X-Form Mirror. Create Arc Polar. Trim 3 Entities. Create Arc Tangent to 3 Entities. Create Circle Edge Point. Create Fillets. 07:05 min
07/06/2007
 
3506b 2D Sketcher Project 6 Create Circle Center Point. Create Arc Polar. Create Line Horizontal, Vertical, Polar, Parallel. Create Arc Polar Tangent. Create Arc 3 Points Tangent. Create Circle Edge Points Tangent. Fillet, Trim, and Delete Tools. 08:12 min
07/06/2007
 
3507 X-Form Translate Project X-Form Translate Application, Geometry Selection, Move, Copy, or Join, Distance and Direction, Use New Attributes, Clear Colors, Apply vs. OK. 04:06 min  
3512a Ten Step Project 1 - part 1 Basic 10 Step Approach to Programming in Mastercam X, Part 1. 12:56 min
07/06/2007
 
3512b Ten Step Project 1 - part 2 Basic 10 Step Approach to Programming in Mastercam X, Part 2 11:55 min
07/06/2007
 
3514 Facing Project 1 Create a Facing Toolpath w/Wire Geometry, Create Toolpath w/Stock Setup Definition, Access Tool Library, C-Plane Chaining, Cutting Methods and Options Within the Facing Parameters Page. 12:42 min  
3516 Toolpath Combo Project 1 Creating a new View / Work “0”. Define Stock. Toolpaths Created: Face, Contour Standard and Ramp, Pocket Circle Mill, Drill, Spot-Drill, and Tap. Copy a Toolpath and Re-Chain Geometry. Verify Toolpaths. 13:26 min
07/06/2007
 
3518 Contour Project 2D Creating a Contour toolpath, Chaining Geometry, Lead In/Out, Multi-Pass, Shorten/Extend Contours, Break Function, Leave Stock. 04:34 min
07/06/2007
 

Streamingteacher® training Includes Unlimited Access To:

   • Over 350 Audio/Video based lessons, videos are constantly being added (applies to paid Mastercam® subscriptions)
   • Various types of sample files that you download and follow along with
   • Real world projects that utilize combinations of functions and toolpaths in Mastercam

Additional user subscriptions have the same subscription duration. The subscription(s) begins immediately after purchasing the courseware. Subscriptions for additional users must be made in the initial transaction to qualify for the discount. Re-subscription discount is only available if new subscription(s) are purchased prior to the expiration of existing subscription.

Your Place. Your Time. Your Pace.

With a secure credit card purchase, you can begin learning from trained professionals. Gain unlimited access to detailed audio/video training during the length of your subscription. With quality streaming video and crystal clear voice-over it's like having an instructor by your side 24 hours a day, 7 days a week.

   • Learn from anywhere internet access is available - 24 hrs a day, 7 days a week
   • Adjustable Table of Contents allows you to customize your learning experience
   • This Courseware is Authorized by CNC Software, the makers of Mastercam® and Spaceclaim®
   • User has ability to keep track of their studies, checking off completed items
   • If you are subscribing to our Mastercam® training you can follow along with the detailed table of contents for proper
     sequencing of the training material, while running Mastercam® at the same time.
   • Downloadable files provided that allow you to work along with the projects
   • Courseware is developed and backed by experienced instructors and resellers
   • If you are subscribing to our Mastercam® training it is designed to be used with the demo, HLE (Home Learning Edition),
     student or full version software
   • Experience powerful streaming videos that are designed to be followed in Mastercam
   • Listen to crystal clear voice-over lecture from the best instructors in the industry
   • You have the ability to pause, rewind and replay video segments repeatedly as many times as you like, during your learning
     experience.

System Requirements

   • IBM PC or Mac with Windows Parallels
   • Internet Connection (Dial-up, DSL, Cable, etc.)
   • Browser must have Flash enabled
   • Browser must have cookies enabled
   • Sound card and speakers on your computer, or better yet, a soundcard and headphones
   • Java and Cookies must be enabled for ecommerce purchases

NOTE: To run the current version of the Mastercam® HLE software you are required to have Windows 7 or newer operating system on your computer.  You can view the training videos with any operating system that will run flash files, you just will not be able to work along with the videos in the HLE/student version of the software.

 

Bob Delgatto

Bob is a full time faculty member in the manufacturing program at Clackamas Community College where he develops and teaches curriculum for students seeking degrees and job skills in Manufacturing, Machining, and CNC/CAD/CAM applications.

Prior to teaching Bob was an R&D / Experimental Machinist, for 20 years. Serving the Computer, Medical, and Aerospace industries, his responsibilities lead him to participate in many high profile, international projects.

Bob's involvement with Mastercam began back at version 5, and as Mastercam evolved, his growth continued as a Mastercam Customer, Beta Tester, and Mastercam Certified College Instructor. He is also one of the founding forces in the development of Streamingteacher.

Chris Rizzo

Chris Rizzo is an entrepreneur and Mastercam certified college instructor with a BFA from the Rochester Institute of Technology where he majored in Industrial Design. He works with Mastercam on a daily basis and enjoys studying and mastering the features and then sharing the knowledge with his students.

Chris is part time faculty at Clackamas Community College where he instructs in Mastercam and CNC operation.

Jeremy Haage

Jeremy has 5 years experience doing technical support services for customers, plus workshop/webinar training and internal IT support for MCAM Northwest, Inc. (an Authorized Mastercam Reseller). His background is in PC based hardware & software, with several years experience supporting hardware/software for an Internet Service Provider
      FAQs - Mastercam X
1. Does this courseware come with the Mastercam software?
2. Does the X Demo software work with all Operating Systems?
3. Will Streamingteacher work with an iPhone, IPAD or other mobile devices?
4. Will Streamingteacher work on a MAC operating system?
5. Does this work well with a dial-up connection?
6. I've logged into my subscription but get and "Access Denied" message when I try to view the videos?
7. Can I change my Username and Password?
8. Will more material be added to the Mastercam vX courseware?
9. If I buy subscriptions for multiple users and one of them is never assigned, can I have that subscription added to the end of one of the other subscriptions?
10. If I buy a subscription for 90 days and decide I want to continue my subscription when it expires can I get a the discounted price on my re-subscription?
11. If I have ordered the wrong courseware can I exchange it?
12. Can I only access the courseware thru the computer on which I made the purchase?
13. Can I pay for my subscription in Payments?
14. What if I choose the 50/50 payment plan and my credit card is declined on my 2nd payment?
15. How can I pay for my subscription?
16. Do you accept Grants and Vouchers for payment?
17.  Do you offer a discount to re-subscribe?
18. My subscription has expired can I still get the 15% discount to re-subscribe?
19. I have an active subscription can I purchase a subscription for someone else and get the 15% discount?
20. Can I purchase more than 1 subscription with the 15% re-subscription discount?
21. Why can't I login to the website? I don't receive any indication that my login or password was entered incorrectly.
22. Why do I get an access denied message when I try to load a video?
23. I'm having problems with the courseware when trying to view in Internet Explorer - how do I resolve this?
1. Does this courseware come with the Mastercam software?
Yes, it comes with the Mastercam X Demo software. You are able to download it at no additional charge once you subscribe to the courseware. This will allow you to do the projects that are included with the courseware, but the demo version does not allow you to "save" files.
Back to Top
2. Does the X Demo software work with all Operating Systems?
No, the system requirements for Mastercam X list Windows XP, Vista and 2000 as supported operating systems. The Demo software will not work with Windows ME or MAC.
Back to Top
3. Will Streamingteacher work with an iPhone, IPAD or other mobile devices?
Streamingteacher requires Adobe Flash a multimedia and software platform to play/watch the videos. Unfortunately IPad and IPhone do not support flash. (there are browsers you can download that allow for Flash in IOS such as Puffin Web Browsers by CloudMosa, Inc. and others.)
Back to Top
4. Will Streamingteacher work on a MAC operating system?
Streamingteacher videos can be watched anywhere you have an internet connection (see: will Streamingteacher work with an iPhone or iPad?) However, the Mastercam software/HLE/Demo software will not work with MAC unless you are running Windows Parallels.
Back to Top
5. Does this work well with a dial-up connection?
Yes, with the testing we have done. If the player gets ahead of the download, the system will just pause until it has downloaded enough material to play.
Back to Top
6. I've logged into my subscription but get and "Access Denied" message when I try to view the videos?
Make sure that your session has not timed out. If you are logged in and not active on the site for 30 minutes the system will log you out, try logging in again. If the problem continues check to make sure that all of the Pop Up Blockers on your computer are turned off.
Back to Top
7. Can I change my Username and Password?
You can not change your Username (it should be your email address), however you can change your password by logging into your account and selecting "Account Information" in the menu to the left, and checking the "Change Password" box below your email address. This will give you another popup box where you can enter your new password.
Back to Top
8. Will more material be added to the Mastercam vX courseware?
No. Once a new version of Mastercam is released we quit adding material to the previous versions.
Back to Top
9. If I buy subscriptions for multiple users and one of them is never assigned, can I have that subscription added to the end of one of the other subscriptions?
No, we offer discounted pricing for multiple users at the time of purchase. We are unable to combine multiple subscriptions into one subscription.
Back to Top
10. If I buy a subscription for 90 days and decide I want to continue my subscription when it expires can I get a the discounted price on my re-subscription?
No, we offer discounted pricing for extended subscriptions at the time of purchase only or if re-ordered before your existing subscription expires.
Back to Top
11. If I have ordered the wrong courseware can I exchange it?
Yes, if you have ordered the wrong courseware log into your subscription and next to the courseware button on your User Account page you will see the text "Exchange Courseware". You can exchange your courseware with no charge within 48 hours of purchase. There is a $25 to exchange your courseware after 48 hours. (you can not exchange for the Certification Courseware)
Back to Top
12. Can I only access the courseware thru the computer on which I made the purchase?
No, Streamingteacher will work on any computer anywhere you have an internet connection. (Note: only one computer at a time can be logged into the same subscription.)
Back to Top
13. Can I pay for my subscription in Payments?
Yes, we can break up your payment in 2 equal payments, with the first being due at the time of subscription and then again on that date the following month. (This option does not apply to any payments made thru PayPal or for the Certification Class)
Back to Top
14. What if I choose the 50/50 payment plan and my credit card is declined on my 2nd payment?
You will be responsible for any fees incurred with your bank for an NSF item and your subscription will be suspended immediately until you contact us with current payment information.
Back to Top
15. How can I pay for my subscription?
We accept most major credit cards - Visa, MasterCard, American Express, and Discover. You can also pay by electronic check or credit card thru PayPal.
Back to Top
16. Do you accept Grants and Vouchers for payment?
We will only accept certain grants and vouchers for our Streamingteacher Certification Courseware. To see if your grant or voucher is accepted please call Clackamas Community College at (503) 657-6958 x2062 or email debym@clackamas.edu and tell them you are interested in the Streamingteacher Certification for Mastercam Online Classes.
Back to Top
17.  Do you offer a discount to re-subscribe?
Yes. there is a 15% re-subscription discount if you re-subscribe before your existing subscription expires. To get your discount log into your subscription and click on the "Renew with Discount" text located next to your quick launch button. (Note: although the time will be added to your existing subscription payment will be charged at the time of re-subscription.
Back to Top
18. My subscription has expired can I still get the 15% discount to re-subscribe?
No, our system is set up to only offer the discount if the purchase is made prior to the expiration of the existing subscription.
Back to Top
19. I have an active subscription can I purchase a subscription for someone else and get the 15% discount?
Yes. You will be charged 1st user pricing - 15%. Click on the "Renew with Discount" text located next to your quick launch button and follow the instructions. You will be prompted to enter if this purchase is being made for "yourself", "yourself and someone else" or "just for others". Select the appropriate option. The discount is given for the entire purchase.
Back to Top
20. Can I purchase more than 1 subscription with the 15% re-subscription discount?
Yes, the 15% discount will be given for the entire order plus whatever multiple subscription price breaks may apply. (Example: You will be charged 1st user pricing less 15% for the 1st subscription and half price less 15% for each additional subscription purchased at that time.)
Back to Top
21. Why can't I login to the website? I don't receive any indication that my login or password was entered incorrectly.
If you do receive an 'Invalid username/password' message then please try to enter your username/password again. If you have forgotten your password, use the 'Forgot Password?' link to retrieve your password. Username and passwords are case sensitive.If you do not receive an 'Invalid username/password' message and still can't login to the site then ensure that your web browser is configured with the following: Cookies Enabled - Java Enabled - If you use pop-up blocker software try disabling this or add http://www.streamingteacher.com to the list of allowed sites
Back to Top
22. Why do I get an access denied message when I try to load a video?
An access denied message indicates one of two things, you are either not currently logged into the website or your account does not currently have an active subscription to this courseware. There is a 30 minute inactivity timeout on this website, so please check the login panel on the left to make sure you are currently logged in. If you are logged in and still receive the access denied message, check your "My Account" page to ensure the courseware you are trying to access is listed under the 'Quick Launch' section.
Back to Top
23. I'm having problems with the courseware when trying to view in Internet Explorer - how do I resolve this?
If you open IE and go into "Tools" on the tool bar and then "Compatibility View" and add Streamingteacher.com is should resolve most issues.
Back to Top
Date Lesson Segment Title Revision Details
April 15, 2013, 12:00 am Introduction 6100A-16 How to use Streamingteacher Added new video segment.
September 30, 2008, 12:00 am Solid Modeling 3347j Solid Sweep - Part 2 New Segment Added
September 30, 2008, 12:00 am Solid Modeling 3347j Solid Sweep - Part 2 New video added.
September 9, 2008, 12:00 am Fillets, Chamfers and Splines 3650l Modify Spline function New Segment Added.
July 16, 2008, 12:00 am Geometry Selection Methods 3227a Chaining Basics Old Segment edited.
February 13, 2008, 12:00 am Solid Modeling 3348L Solid Shell Function New Segment Added
July 6, 2007, 12:00 am Importing Exporting Toolpaths 3425b Export Operations Segment added to new Topic
July 6, 2007, 12:00 am Importing Exporting Toolpaths 3425c Import Operations Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Combination Projects 3516 Toolpath Combo Project 1 Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Combination Projects 3426 2 Vise Set-up Project - Part 1 Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Combination Projects 3427 2 Vise Set-up Project - Part 2 Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Combination Projects 3428 2 Vise Set-up Project - Part 3 Segment added to new Topic
July 6, 2007, 12:00 am Interface 3201 Menus / Interface Segment added to new Topic
July 6, 2007, 12:00 am Interface 3203 Toolbars Segment added to new Topic
July 6, 2007, 12:00 am Interface 3205 Hotkeys Segment added to new Topic
July 6, 2007, 12:00 am Interface 3207 Mouse Actions Segment added to new Topic
July 6, 2007, 12:00 am Entering Coordinates 3215 Auto Cursor / Auto Highlight Segment added to new Topic
July 6, 2007, 12:00 am Entering Coordinates 3650c MR2: AutoCursor Lock / Overrides Segment added to new Topic
July 6, 2007, 12:00 am Entering Coordinates 3209 Keyboard Data Entry Segment added to new Topic
July 6, 2007, 12:00 am Entering Coordinates 3650a Fastpoint Segment added to new Topic
July 6, 2007, 12:00 am Geometry Selection Methods 3221 General Selection Ribbon Bar Segment added to new Topic
July 6, 2007, 12:00 am Geometry Selection Methods 3227a Chaining Basics Segment added to new Topic
July 6, 2007, 12:00 am Geometry Selection Methods 3227b Chain Selection Problems Segment added to new Topic
July 6, 2007, 12:00 am Geometry Selection Methods 3223 Pre-Selection Segment added to new Topic
July 6, 2007, 12:00 am Geometry Selection Methods 3225 Masking Segment added to new Topic
July 6, 2007, 12:00 am Advanced Interface 3229 Levels Basics Segment added to new Topic
July 6, 2007, 12:00 am Advanced Interface 3231 Levels Manager Segment added to new Topic
July 6, 2007, 12:00 am Advanced Interface 3303 Colors, Line Style and Width Segment added to new Topic
July 6, 2007, 12:00 am Advanced Interface 3305 Attributes Manager Segment added to new Topic
July 6, 2007, 12:00 am Advanced Interface 3307 Groups / Result Segment added to new Topic
July 6, 2007, 12:00 am Advanced Interface 3308 Blank / Un-Blank, Hide / Un-Hide Segment added to new Topic
July 6, 2007, 12:00 am M3DG: Importing - Exporting CAD 3306 File Merge / Pattern Segment added to new Topic
July 6, 2007, 12:00 am Geometry Basics 3309 2D / 3D Mode Segment added to new Topic
July 6, 2007, 12:00 am Geometry Basics 3318 Relative Positioning Segment added to new Topic
July 6, 2007, 12:00 am Points, Lines and Rectangles 3321 Point Function Segment added to new Topic
July 6, 2007, 12:00 am Points, Lines and Rectangles 3315 Line Function Segment added to new Topic
July 6, 2007, 12:00 am Points, Lines and Rectangles 3316 More Create Line Function Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3317 Arc Tool Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3317b Arc Polar Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3317c Create Circle Edge Point Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3317d Create Arc Endpoint Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3317e Create Arc 3 Points Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3317f Create Arc Polar Endpoints Segment added to new Topic
July 6, 2007, 12:00 am Create Arcs 3322 Create Bolt Hole Circles Segment added to new Topic
July 6, 2007, 12:00 am Trim / Break Polygons and Bounding Box 3323b Create Bounding Box 2D / 3D Segment added to new Topic
July 6, 2007, 12:00 am Trim / Break Polygons and Bounding Box 3324 Create Polygon / Ellipse Segment added to new Topic
July 6, 2007, 12:00 am Trim / Break Polygons and Bounding Box 3327 Trimming Tool Segment added to new Topic
July 6, 2007, 12:00 am Trim / Break Polygons and Bounding Box 3329 Break Functions Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3501 2D Sketcher Project 1 Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3502 2D Sketcher Project 2 Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3503 2D Sketcher Project 3 Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3504 2D Sketcher Project 4 Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3505 2D Sketcher Project 5 - Part 1 Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3506 2D Sketcher Project 5 - Part 2 Segment added to new Topic
July 6, 2007, 12:00 am Sketcher Projects 3506b 2D Sketcher Project 6 Segment added to new Topic
July 6, 2007, 12:00 am Views, Planes and WCS 3239 Named Views, WCS Segment added to new Topic
July 6, 2007, 12:00 am Views, Planes and WCS 3240 Changing The WCS Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3512a Ten Step Project 1 - part 1 Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3512b Ten Step Project 1 - part 2 Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3401 Operations Manager Overview Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3650g Toolpath Manager Display Settings Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3407 Common Toolpath Parameters - Part 1 Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3408 Common Toolpath Parameters - Part 2 Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3408d Cutter Compensation Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 3408a Absolute vs. Incremental Depths Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3408b Backplot Options Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3650f Backplot Tool Display Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3408c Verify Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3650m STL Compare Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3650h User Defined Speeds / Feeds Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3607 Toolpath Editor Segment added to new Topic
July 6, 2007, 12:00 am Toolpath Management 3650e Name NC Files Segment added to new Topic
July 6, 2007, 12:00 am Facing Toolpaths 3409 Facing Function Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411a Pocket Basics Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411b Pocket Incremental Depths Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411C Pocket Finish Passes Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411E Pocket Plunge Entry in a Hole Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411F Pocket Additional Finish Operation Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411G Pocket Face Toolpath Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411H Pocket Island Face Toolpath Segment added to new Topic
July 6, 2007, 12:00 am Pocket Toolpaths 3411I Pocket Re-Machining Segment added to new Topic
July 6, 2007, 12:00 am Contour Toolpaths 3413a 2D Contour Function Segment added to new Topic
July 6, 2007, 12:00 am Contour Toolpaths 3413b 2D Contour - Lead In / Out Segment added to new Topic
July 6, 2007, 12:00 am Contour Toolpaths 3413c 2D Contour - Depthcuts / Multipass Segment added to new Topic
July 6, 2007, 12:00 am Contour Toolpaths 3413d 2D Contour - 2D Chamfer Segment added to new Topic
July 6, 2007, 12:00 am Contour Toolpaths 3413e 2D Contour - Chamfer Supplement Segment added to new Topic
July 6, 2007, 12:00 am Contour Toolpaths 3518 Contour Project 2D Segment added to new Topic
July 6, 2007, 12:00 am Drill Toolpaths 3417a Drill Function - Drill Parameters Segment added to new Topic
July 6, 2007, 12:00 am Drill Toolpaths 3417b Drill Function - Entity Selection Methods 1 Segment added to new Topic
July 6, 2007, 12:00 am Drill Toolpaths 3417c Drill Function - Entity Selection Methods 2 Segment added to new Topic
July 6, 2007, 12:00 am Introduction to Toolpaths 6222 Machine Control Definitions Segment added to new Topic
January 8, 2007, 12:00 am Introduction to Toolpaths 6222 Machine Control Definitions New Segment Added.
January 8, 2007, 12:00 am Configuration 6225 Setting Up Autosave New Segment Added.
September 18, 2006, 12:00 am Toolpath Combination Projects 3427 2 Vise Set-up Project - Part 2 New Segment Added.
June 16, 2006, 12:00 am Points, Lines and Rectangles 3323 Rectangle / Rectangular Shapes Added new video segment.
June 5, 2006, 12:00 am Configuration 3650i Chaining Default Options, and Level Descriptor New Segment Added.
June 5, 2006, 12:00 am Fillets, Chamfers and Splines 3650l Modify Spline function New Segment Added.
May 31, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3647a HST Project 2 Roughing Part 1 New Segment Added. MCX File Download Added.
May 31, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3647b HST Project 2 Roughing Part 2 New Segment Added.
May 31, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3648a HST Project 2 Finishing Part 1 New Segment Added.
May 31, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3648b HST Project 2 Finishing Part 2 New Segment Added.
May 31, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3648c HST Project 2 Finishing Part 3 New Segment Added.
May 23, 2006, 12:00 am Configuration 3650j MCX Backup Files New Segment Added.
May 23, 2006, 12:00 am Toolpath Management 3650m STL Compare New Segment Added.
May 23, 2006, 12:00 am Configuration 3650n Browse for External Communications New Segment Added.
May 18, 2006, 12:00 am Entering Coordinates 3650a Fastpoint New Segment Added.
May 18, 2006, 12:00 am Entering Coordinates 3650b Power Keys New Segment Added.
May 18, 2006, 12:00 am Entering Coordinates 3650c MR2: AutoCursor Lock / Overrides New Segment Added.
May 18, 2006, 12:00 am Interface 3650d Un-Zoom Previous New Segment Added.
May 18, 2006, 12:00 am Toolpath Management 3650e Name NC Files New Segment Added.
May 18, 2006, 12:00 am Toolpath Management 3650f Backplot Tool Display New Segment Added.
May 18, 2006, 12:00 am Introduction to Toolpaths 3650g Toolpath Manager Display Settings New Segment Added.
May 18, 2006, 12:00 am Toolpath Management 3650h User Defined Speeds / Feeds New Segment Added.
May 18, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3650p HST Rest Roughing New Segment Added.
May 18, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3650q HST Stock to Leave on Floors and Walls New Segment Added.
April 11, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3644 HST Combo Project Part 1 New Segment Added. MCX File Download Added.
April 11, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3645 HST Combo Project Part 2 New Segment Added.
April 11, 2006, 12:00 am HST / High Speed Toolpath Combo Projects 3646 HST Combo Project Part 3 New Segment Added. STL File Download Added.
April 7, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3643 Arc Filter New Segment Added. MCX File Download Added.
March 17, 2006, 12:00 am Create Arcs 3322 Create Bolt Hole Circles New Segment Added. MCX File Download Added.
March 17, 2006, 12:00 am Importing Exporting Toolpaths 3425b Export Operations New Segment Added. MCX File Download Added.
March 17, 2006, 12:00 am Importing Exporting Toolpaths 3425c Import Operations New Segment Added. MCX File Download Added.
February 28, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3642 Raster New Segment Added. MCX File Download Added.
February 22, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3641 Scallop New Segment Added. MCX File Download Added.
February 22, 2006, 12:00 am Toolpath Combination Projects 3516 Toolpath Combo Project 1 New Segment Added. MCX File Download Added.
February 8, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3640 Pencil Cutting New Segment Added. MCX File Download Added.
January 25, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3636 Restmill Setting New Segment Added. MCX File Download Added.
January 25, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3637 Adaptive Stepdown New Segment Added. MCX File Download Added.
January 25, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3638 Horizontal Finish New Segment Added. MCX File Download Added.
January 25, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3639 Waterline New Segment Added. MCX File Download Added.
January 9, 2006, 12:00 am Solid Modeling 3348j Solid Sweep New Segment Added.
January 9, 2006, 12:00 am Solid Modeling 3348k Solid Draft Faces New Segment Added.
January 9, 2006, 12:00 am Toolpath Combination Projects 3426 2 Vise Set-up Project - Part 1 New Segment Added. MCX & STL File Downloads Added.
January 9, 2006, 12:00 am Toolpath Combination Projects 3427 2 Vise Set-up Project - Part 2 New Segment Added. MCX & STL File Downloads Added.
January 9, 2006, 12:00 am Toolpath Combination Projects 3428 2 Vise Set-up Project - Part 3 New Segment Added. MCX & STL File Downloads Added.
January 4, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3634 Core Roughing New Segment Added.
January 4, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3635 Area Clearance New Segment Added.
January 3, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3632 Introduction to HST Machining New Segment Added.
January 3, 2006, 12:00 am 3D HST (High Speed Toolpaths) 3633 Overview of HST Machining New Segment Added.
December 22, 2005, 12:00 am Service Pack 2 Updates (SP2) 3602 SP2 & MR1: Interface Changes - part 1 New Segment Added.
December 22, 2005, 12:00 am Service Pack 2 Updates (SP2) 3603 SP2 & MR1: Interface Changes - part 2 New Segment Added.
December 22, 2005, 12:00 am Service Pack 2 Updates (SP2) 3604 SP2 & MR1: Interface Changes - part 3 New Segment Added.
December 22, 2005, 12:00 am Service Pack 2 Updates (SP2) 3605 SP2 & MR1: Interface Changes - part 4 New Segment Added.
December 22, 2005, 12:00 am Toolpath Management 3607 Toolpath Editor New Segment Added.
December 22, 2005, 12:00 am Solid Modeling 3608 Silhouette Boundary New Segment Added.
December 13, 2005, 12:00 am Solid Modeling 3348g Solid Extrude Thin Wall Option New Segment Added.
December 13, 2005, 12:00 am Solid Modeling 3348h Solid Revolve New Segment Added.
December 13, 2005, 12:00 am Solid Modeling 3348i Solid Revolve Cut New Segment Added.
December 6, 2005, 12:00 am Beginning Solids / Primitives 3348d Surface/Solids Shading New Segment Added.
December 2, 2005, 12:00 am Service Pack 1 Updates (SP1) 3601 SP1: Service Pack 1 Changes Updated section of video explaining Change Program #.
November 28, 2005, 12:00 am Solid Modeling 3348e Solid Extrude Function - part 1 Segment 3348f Revised And Split Into Two Video Segments.
November 28, 2005, 12:00 am Solid Modeling 3348f Solid Extrude Function - part 2 Segment 3348f Revised And Split Into Two Video Segments.
November 28, 2005, 12:00 am Service Pack 1 Updates (SP1) 3601 SP1: Service Pack 1 Changes New Segment Added. This Is The First In A Series Of New Segments In The Updates Block.
November 14, 2005, 12:00 am Solid Modeling 3348e Solid Extrude Function - part 1 New Video Segment Added.
November 3, 2005, 12:00 am Beginning Solids / Primitives 3348c Solid Primitives Project New Video Segment Added. ZIP File Download Added (Includes MCX & PDF Files).
October 31, 2005, 12:00 am Views, Planes and WCS 3239 Named Views, WCS Video Segment Modified.
October 31, 2005, 12:00 am Create Arcs 3317g Create Arc Tangent New Video Segment Added.
October 21, 2005, 12:00 am Beginning Solids / Primitives 3348b Creating Primitive Shapes New Video Segment Added.
October 18, 2005, 12:00 am Beginning Solids / Primitives 3348a 3D Primitives Basics New Video Segment Added.
October 11, 2005, 12:00 am Fillets, Chamfers and Splines 3326 Converting Splines to Arcs New Video Segment Added.
October 11, 2005, 12:00 am Beginning Solids / Primitives 3348 Intro to Solids New Video Segment Added.
October 4, 2005, 12:00 am Introduction to Toolpaths 3408a Absolute vs. Incremental Depths New Video Segment Added.
September 26, 2005, 12:00 am Contour Toolpaths 3518 Contour Project 2D New Video Segment Added.
September 16, 2005, 12:00 am Views, Planes and WCS 3240 Changing The WCS New Video Segment Added.
September 8, 2005, 12:00 am Views, Planes and WCS 3239 Named Views, WCS New Video Segment Added.
September 8, 2005, 12:00 am Advanced Interface 3308 Blank / Un-Blank, Hide / Un-Hide New Video Segment Added.
September 8, 2005, 12:00 am Advanced Interface 3333 2D Dimensioning New Video Segment Added.
September 1, 2005, 12:00 am M3DG: Importing - Exporting CAD 3306 File Merge / Pattern New Video Segment Added.
September 1, 2005, 12:00 am Advanced Interface 3307 Groups / Result New Video Segment Added.
August 26, 2005, 12:00 am Create Arcs 3317f Create Arc Polar Endpoints New Video Segment Added.
August 17, 2005, 12:00 am Sketcher Projects 3506b 2D Sketcher Project 6 New Video Segment Added. PDF File Download Added.
August 16, 2005, 12:00 am Create Arcs 3317e Create Arc 3 Points New Video Segment Added.
August 15, 2005, 12:00 am Introduction to Toolpaths 3407 Common Toolpath Parameters - Part 1 Fixed the link to launch Part 1 instead of Part 2.
August 10, 2005, 12:00 am Geometry Selection Methods 3225 Masking New Video Segment Added.
August 5, 2005, 12:00 am Create Arcs 3317d Create Arc Endpoint New Video Segment Added.
August 5, 2005, 12:00 am Trim / Break Polygons and Bounding Box 3329 Break Functions New Video Segment Added.
August 4, 2005, 12:00 am Introduction 3105 Tooltips and Learning Mode Prompts New Video Segment Added.
August 3, 2005, 12:00 am Entering Coordinates 3215 Auto Cursor / Auto Highlight New Video Segment Added.
August 3, 2005, 12:00 am Interface 3217 Status Bar New Video Segment Added.
August 3, 2005, 12:00 am Geometry Selection Methods 3221 General Selection Ribbon Bar New Video Segment Added.
August 3, 2005, 12:00 am Interface 3241 Undo / Delete Added new video segment.
August 3, 2005, 12:00 am Advanced Interface 3243 Multi-Viewports Added new video segment.
August 3, 2005, 12:00 am Advanced Interface 3303 Colors, Line Style and Width Added new video segment.
August 2, 2005, 12:00 am Introduction to Toolpaths 3401 Operations Manager Overview New Video Segment Added.